1964-72 GM A-Body Chevelle/ Monte Carlo/GTO/Cutlass Tubular Control Arms
Tubular Control Arms For 1967-69 F-Body Upper Arms With Del-A-Lum Bushings GLOCTA79A
,PSURYHVIDFWRU\VXVSHQVLRQ geometry and lowers center of gravity 1" for better cornering
Tubular upper and lower front control arms increase camber and improve roll FDPEHUNHHSLQJWKHWLUHVÀDWGXULQJ acceleration and cornering. Direct
performance. Arms must be used with the taller 8-15/16" spindles found on 1973-86 GM vehicles. Set is available with polyurethane or Del-A-Lum bushings and for stock coil springs or QA1 coil-over setups. Part No. Description GLOCTA42A 1964-72 A-Body Upper Arms With Del-A-Lum Bushings GLOCTA42L 1964-72 A-Body Lower Arms For Std. Coil Springs With Del-A-Lum Bushings Adjustable Rear Upper Control Arms
bolt-on upgrade for factory control arms, each set is available with polyurethane or Del-A-Lum bushings for stock coil spring or QA1 coil-over versions. Del-A-Lum Leaf Spring Bushings Kit GLO103SH
Del-A-Lum Bushings create a virtu- ally friction free pivot point for rear leaf spring suspension. The kit includes front and rear spring bushings for multi-leaf springs, shackles and upper shackle bushings. Subframe Connectors Tying a uni-body chas-
Rear adjustable upper control arms improve handling and stability, re- duce wheel hop and are adjustable for correction of pinion angle when the vehicle is lowered. Part No. Description
GLOTBC47 1964-67 GM A-Body GLOTBC82 1968-72 GM A-Body Rear Lower Control Arms GLOTBC4 Global West rear lower control arms improve handling and stabil- ity and have a bearing on the frame side to eliminate binding when the rear end pivots. Del-A-Lum Bushings on the differential end add lateral control. Adjustable Frame Supports For 1968-72 GM A-Body GLOTS82
sis together improves all around performance and rigidity. Global West subframe connectors weld to the rear frame rail, instead of the spring pocket, and bolt to the front subframe. Part No. Description GLO900 1967-69 GM F-Body GLO902 1974-81 GM F-Body Aluminum Body Mount Bushings For 1967-81 GM F-Body With Global
West Connectors GLO809 Solid aluminum body mount bushings are highly recommended when using subframe connectors. Unlike rubber and urethane bush- LQJVWKH\¿QLVKWKHVWUXFWXUDOOLQNDQGHOLPLQDWH FKDVVLVÀH[ Machined Tie Rod Sleeves GLOADJ3 Machined tie rod adjusting sleeves are the per- fect replacement for 1970-81 F-body factory stamped sleeves. 1968-74 GM X-Body Nova
*OREDO:HVW¶V$GMXVWDEOH)UDPH 6XSSRUWV¿WSUHFLVHO\WRVWUHQJWKHQ
upper frame and crossmember and eliminate the sloppy factory slotted brackets. Packaged with all hardware. Coil Front Springs For 1968-72 GM A-Body, Big Block, GLOS19 ,PSURYHKDQGOLQJDQGDFKLHYHDSHUIHFWORZHUHG stance with linear rate coil springs. Sold in pairs. Leaf Springs Performance leaf springs lower the vehicle for better handling and help eliminate D[OHZUDSZKLFKFDXVHVZKHHOKRS6ROGLQSDLUV Part No. Description GLOL2
Tubular Control Arms For 1968-74 X-Body Upper Arms With Del-A-Lum Bushings GLOCTA79A Tubular upper and lower front control
1967-69 GM F-Body Rear Leaf Springs, 1-1/4" Drop 1970-73 GM F-Body Rear Leaf Springs, 1" Drop 1974-81 GM F-Body Rear Leaf Springs, 1" Drop
arms have increased camber and improved roll camber to keep the tire ÀDWGXULQJDFFHOHUDWLRQDQGFRUQHU - ing. A direct bolt-on replacement for the factory control arms. Sets are available with polyurethane or Del-A-Lum bushings for stock coil spring or QA1 coil-over versions.
GLOL2 GLOL3
199 2018 HOT ROD AND EARLY MUSCLE
Made with FlippingBook flipbook maker