ANNUALS | SEED FINISHING
Primula obconica F1 Primula LIBRE ™
FINISH PGRs
TECH TIPS
If needed sprays of B-Nine ® WSG at 2,500–5,000 ppm are effective.
Control thrips to avoid Tospovirus.
Primula acaulis F1 Primula PRIMERA ™ FINISH PGRs
TECH TIPS
Avoid direct sunlight as leaf scorch may occur.
If grown at the recommended temperatures PGR applications should not be necessary. If needed sprays of B-Nine ® WSG at 2,500–5,000 ppm are effective in helping control leaf size.
Ranunculus asiaticus F1 Ranunculus MACHÉ ™ FINISH PGRs
TECH TIPS
Control thrips to avoid Tospovirus.
B-Nine ® WSG at 2,500–5,000 ppm. If grown cool PGR applications are usually not necessary but under warm conditions one to three sprays of B-Nine ® WSG may be beneficial to control leaf size.
Ranunculus asiaticus F1 Ranunculus MAGIC ™ FINISH PGRs
TECH TIPS
Since Magic Ranunculus is a genetically compact plant, PGRs are not needed.
Control thrips to avoid Tospovirus.
Salvia farinacea OP Salvia VICTORIA ™ FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 5–15 ppm, or A-Rest ® at 3–10 ppm. If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be used without delaying flowering.
Practice a good wet/dry moisture cycle, but avoid extremes of wet and dry. Salvias are sensitive to high salts, be sure to maintain EC levels below 2.0 mS/cm (PourThru).
Salvia splendens OP Salvia MOJAVE ™ FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm.
If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be applied without delaying flowering. Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts, best to maintain EC levels below 2.0 mS/cm (PourThru).
Salvia splendens OP Salvia SENTRY ™
FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm. If needed, to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–-1 ppm can be used without delaying flowering.
Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts, so maintain EC levels below 2.0 mS/cm (PourThru).
Salvia splendens OP Salvia SIZZLER ™ FINISH PGRs
TECH TIPS
If needed to control height, spray with B-Nine ® WSG at 2,500 ppm, Bonzi ® at 10–30 ppm, or A-Rest ® at 5–10 ppm. If needed to control height when plants are starting to flower, a drench with Bonzi ® at 2–3 ppm or Sumagic ® at 0.5–1 ppm can be used without delaying flowering.
Practice a good wet/dry moisture cycle but avoid extremes of wet and dry. Salvias are sensitive to high salts so maintain EC levels below 2.0 mS/cm (PourThru).
Schizanthus × wisetonensis F1 Schizanthus ATLANTIS ™ FINISH PGRs
TECH TIPS
B-Nine ® WSG at 1,500–3,000 ppm if needed.
Keep under short days for 2 weeks after transplant to allow plants to bulk, then extend the day length to 14 hours to induce flowering. Keep plants on the dry side to avoid soft growth that is prone to Botrytis and soft rots. Highly sensitive to Tospoviruses (INSV and TSWV), so it is imperative to control thrips.
GROWER SUCCESS GUIDE 2026–2028
39
Made with FlippingBook Learn more on our blog