c o n t r o l me c h a n i s m s ( pa r t 1 of 2)
PART # DETAILS
CONTROL
INSTRUCTIONS
OFFERED ON SERIES
3C
Active back synchro control mechanism. -12SS With seat slide.
1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (5 position)- Pull lever upward and shift your weight forward or back to desired angle. Release lever to lock. To free float the back, pull lever upward until locked. 3 Back/recline tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 4 Optional seat slider (add -12SS )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (5 position)- Pull lever upward and shift your weight forward or back to desired angle. Release lever to lock. To free float the back, pull lever upward until locked. 3 Back/recline tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 4 Back tilt adjustment- Adjusts from 6° forward to 3° back. Pull lever upward to lock. Shift your weight forward or backward to desired weight angle. Release lever to lock. To free float the seat, pull lever upward until locked. 5 Optional seat slider (add -12SS )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (6 position)- Pull lever upward and shift your weight forward or back to desired angel. Release lever to lock. To free float the back, pull lever upward until locked. 3 Back/recline tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 4 Optional seat slider (add -12SS )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (5 position)- Tilt the seat back to desired angle and twist a quarter turn. To unlock, twist the other way and lean back. 3 Back/recline tension adjustment- Pull paddle knob out. Turn right to tighten or left to loosen the back tension. 4 Optional seat slider (use control -10CH )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (single position)- Use the same paddle as you use for the seat height adjustment. To lock the chair in an upright position, shift your weight forward until the chair is in an upright position, then push lever in. To rock (free float) shift your weight forward and pull the lever out. 3 Back/recline tension adjustment- Rotate knob clockwise to increase tilt tension. Rotate knob counter clockwise to decrease tilt tension. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (single position)- Use the same paddle you used for the seat height adjustment. To lock the chair in an upright position, shift your weight forward until the chair is in an upright position, then push lever in. To rock (free float) shift your weight forward and pull the lever out. 3 Back/recline tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 4 Optional seat slider (use control -13C )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back.
Brisbane & Terra.
2
4
3
1
5C
Advanced ergo synchro control mechanism. -12SS With seat slide.
Brisbane & Terra.
2
4
3
1
6C
Bio-sync ergo synchro control mechanism. -12SS With seat slide.
Brisbane & Terra.
2
4
3
1
9CH 10CH
Synchro control
High backs in series Carmel, Linate & Oslo.
mechanism with heavy- duty spring tension. 10CH With seat slide. Single position knee tilt control mechanism for single shells. Note: Seat and back tilt as a unit. Single position knee-tilt control for split shells. 13C With seat slide.
4
3
2
1
1
11C
Carmel, Dyce, & Linate.
1
2
3
12C 13C
Oslo mid backs.
1
4
3
2
Note: Seat and back tilt as a unit.
26 VIA SEATING LIST PRICING 2021, 3RD ED. | TABLE OF CONTENTS | VISIT WWW.VIASEATING.COM/SPEC-IT FOR THE LATEST OPTIONS | 1-800-433-6614 | 08/01
Made with FlippingBook - professional solution for displaying marketing and sales documents online