Operations training
High Voltage Standard / V2 PUBLIC HEARING DRAFT 0.1
5.1 Overview
The GWO High Voltage Standard is divided into the following 4 modules:
Module 1: High Voltage Operations Module 2: High Voltage Cable Pulling
Module 3: High Voltage T-Connector Installation Module 4: High Voltage Transformer Maintenance
5.2 Target Groups
Target Groups - High Voltage Operations The training target group includes workers required to operate and make safe high voltage equipment and systems, under a documented safe system of work, including commissioning technicians and service technicians, both onshore and offshore. Target Groups - High Voltage Cable Pulling The training target group includes workers required to perform or supervise high voltage cable pulling operations, including offshore pre-assembly technicians, as well as installation technicians and service technicians completing replacement of HV cable, both onshore and offshore. Target Groups - High Voltage T-Connector Installation The training target group includes workers required to perform connection or disconnection of plug and play type HV cable connectors. The training is suitable for technicians working with pre-terminated HV cables and a range of typical separable HV connector types used in the wind industry, both onshore and offshore during HV equipment installation and maintenance activities. Target Groups - High Voltage Transformer Maintenance The training target group includes workers required to support the maintenance of high voltage transformers and adjacent systems in the wind industry, both onshore and offshore. The training is suitable for technicians who require an introduction to safe and effective procedures for routine inspection and basic corrective maintenance tasks on HV transformers. 5.3 Aims and Objectives Training in accordance with this High Voltage Standard will enable participants to support work related to high voltage equipment and systems as per the specific module focus area and detailed topics within. High Voltage Operations This training intends to prepare workers to operate and make safe High Voltage equipment and systems, under a documented safe system of work. High Voltage Cable Pulling This training focusses on the effective performance of High Voltage Cable Pulling operations, under a documented safe system of work. The goal of training is to increase the quality of HV cable pulling operations, while supporting and promoting safe working practices.
Global Wind Organisation / www.globalwindsafety.org
11 / 163
Made with FlippingBook flipbook maker