Operations training
High Voltage Standard / V2 PUBLIC HEARING DRAFT 0.1
10.4 Equipment Requirements of the HV Transformer Maintenance Module
The equipment required for training as listed in Annex 1 must be available and must fulfil national legal requirements as listed in annex 1 where applicable.
When teaching about equipment, a generic approach should be applied whenever possible aiming to avoid only a narrow product specific training. This ensures that participants are ready to adapt to the wide range of equipment they will use in the workplace after completion of this training. However, depending on national or regional legislation, company gap analysis and location specific risk assessments, product specific training or familiarisation may be required, which is the responsibility of the duty holder.
10.5 Timetable of the HV Transformer Maintenance Module
The order in which elements of this module are delivered may vary according to the lesson plans prepared for delivering by the training provider.
The delivery of this module must comply with the requirements described in the GWO Requirements for Training .
Lesson
Element
Duration
1. Module introduction
1.1
Safety instructions and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Aim and objectives
1.5
Ongoing assessment
1.6
Motivation
1.7
Human Factors TOTAL
20 min.
2. Safe working with HV Transformers
HV transformer types, features, components and consequences of maintenance failures
2.1
Inspection routines and preventative maintenance tasks
2.2
Maintaining safe conditions for work, hazard awareness and mitigation TOTAL
2.3
30 min.
3. Routine inspection and maintenance practical
3.1
Routine inspection and maintenance practical
90 min.
Global Wind Organisation / www.globalwindsafety.org
132 / 163
Made with FlippingBook flipbook maker