BGB - Marine brochure

L.E.D LIGHTING: Yacht Lighting - Induction

SILS - Submersible Inductive Lighting System SILS (Submersible Inductive Lighting System) uses induction contactless technology to power the LEDs used within the exterior light.

Electromagnetic induction is the near field wireless transmission of electrical energy between two coils that are tuned to resonate at the same frequency. BGB SILS operates by having the primary unit (the housing for all the inverter electronics and communication control) on the inside of the marine vessel, lined up with the secondary unit (the luminaires and drive circuitry) on the exterior of the vessel. Both units are positioned in place by marine grade adhesives. The operator can tune into the surrounding SILS wifi zone (approx 50m) with their tablet or mobile device and control the RGB-W coloured LEDs with a simple slide of a finger via a BGB App.

SILS does not require any drilling or penetration of the hull in any way (an obvious benefit of using induction systems in the marine industry). The lights can be easily retrofitted without fear of leaks or bad workmanship by an outside electrician and gives peace of mind that the vessel has not been weakened in any way with a hole.

View the BGB SILS website:

* Full Technical specification available on BGB SILS website: www.bgb sils .com


Made with FlippingBook - Online catalogs