Clean Resources - IDC-OF-375 condensate filter - product sheet
IDC-OF 375 Oil-Free Condensate Filter
Unmatched Performance Condensate Filtration for the Oil-Free Rotary Compressor Market Traditional oil-flooded air compressors use oil to lubricate, seal, and prevent air backflow. The oil-free rotary screw compressor airend (worm gear) uses extremely tight tolerances of the internal moving parts to prevent air backflow. Because of these tolerances, metal-on-metal friction occurs, causing particulate matter to pass into the condensate stream.
What Makes Clean Resources the Best OWS? How it works
• Media utilizes molecular sieve technology and chemical bonding • Solids, hydrocarbons, and contaminant molecules attract to the proprietary substrate media bed like a magnet, permanently bonding and eliminating groundwater contamination Standard features • All units are factory pre-plumbed and leak tested • Six inlets for multiple compressors or other downstream components • Gravity flow, no electricity • Guaranteed contaminant removal to meet or exceed EPA-compliant levels for the life of the unit. Maintenance-free—technician approved • No heavy, messy bag change-outs • No exposure to algae, black mold, bacteria or e-coli • Reduces or eliminates illness and allergic reactions Recycle program • Dispose of in accordance with state and local regulations or, • Ship registered unit to Clean Resources for free recycling Environmental conditions • Works in all conditions—contact your distributor for extremely cold climates • Specific gravity, emulsification, relative humidity, and temperature do not affect performance Guaranteed Compliance When properly sized, installed, and registered , our systems are guaranteed for 12 months to perform and reduce the contaminants in your compressor condensate to EPA-compliant levels. If your unit fails under these conditions, Clean Resources will refund the prorated amount remaining on the warranty if a registered unit fails within one year from installation.
The Clean Resources IDC-OF Series condensate filters capture and remove trace, precious, and heavy metal particles (titanium, chromium, etc.) from oil-free compressor condensate. The OF series filters also capture trace amounts of air-borne oil and chemical agents ingested from ambient shop air, including cutting oil, propane, diesel exhaust fumes, and others.
IDC-OF 375 | OIL-FREE CONDENSATE FILTER
Premium Features
1
1 Anti-Siphon Line Vented line eliminates a vacuum siphon at the outlet
2
2 Condensate Inlet Hub Replace red caps with push to connect fittings and insert compressor lines
3 Vent Pressure is decompressed and vented, preventing air locks
4 Outlet 10 ppm or less of filtered condensate exits to sanitary or floor drain
3
4
Sizes and Specifications Inlets
Six 1/4”
Maximum inlet pressure
175 psi
Anti-siphon line Discharge hose
1/4” 3/4”
IDC-OF 375 | OIL-FREE CONDENSATE FILTER
Pump it Up! Is the drain more than 10 feet away? No problem!
How about gravity—need to run the clean condensate uphill? Clean Resources now sells an auxiliary discharge pump for those troublesome installs where the drain is too far away, the outlet hose won’t lay flat or run downhill.
For more information and pricing, check with your distributor or contact us.
Product Installation and Recycling Most Clean Resources products are shipped with printed installation instructions attached to the unit or printed on the label. We know they get tossed out, “lost,” or sometimes you’d just rather not read the instructions.
Not to worry. Each unit’s product label has a QR code that takes you to our installation series of videos. Here you can watch Jerry, our Clean Resources installation expert, talk you through installation and recycling, step-by-step. You will be up and running in no time, and EPA compliant.
Product Specifications
Unit Life in Hours * †
Removes ALL Oil-Free Compressor Contaminants Chromium VOCs Titanium Chemicals Trace Metals
IDC-OF Unit
Width (in)
Depth (in)
Height (in)
Weight (lbs)*
HP ACFM
375
12
14.5
23
50 *shipping weight
40 200 50 250 60 300 75 375 100 500 125 600
16,000 12,000 10,000
Other Heavy Metals
CORRECTION FACTORS ROTARY SCREW COMPRESSORS
8,000 6,000 5,000
Unit Life: [hours from left] x [CF from below] Example: IDC-OF 375 at 50 hp running 6,000 hrs/yr Unit Life: 12,000 x 1.33 = 15,960 hours †
Hrs/yr runtime
8,000 6,000 4,000 2,000
* Unit life numbers in this chart assume rotary screw compressors running 8,000 hrs/yr. Unit life may vary due to differences in air compressor oil consumption rates, age, and maintenance of compressor.
Life Correction Factor (CF)
1 1.33 2
4
† To calculate unit life in months: [Unit Life] / 8,000 * 12
Clean Resources | 1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com
v5.0 2-18-2025
Page 1 Page 2 Page 3 Page 4Made with FlippingBook - Share PDF online