Clean Resources - Powerflow Electronics - condensate drains product brochure
Condensate Drains
CONDENSATE DRAINS
AUTOMATIC DRAIN VALVE
1
Our Automatic Drain Valves work on any compressed air system up to 250 psi and do not air-lock during operation.
2
HIGHLIGHTED FEATURES 1 Electronic Timer
3
2 Power Lead (2m) with Plug 3 Forged Brass Solenoid Valve
1
COMBI DRAIN VALVE
2
Our Combi Drain Valve body incorporates a manual isolation valve and stainless steel strainer screen that removes contaminants before reaching the valve orifice.
3
ADDITIONAL FEATURES
• Completely assembled, ready to install • Adjustable time scales to suit any condensate discharge times • Drain test switch
• Yellow LEDs to indicate the status • Forged brass direct acting solenoid valve • Viton seals
• High-precision stainless steel internals • Valve options: 1 ⁄ 8 ”, 1 ⁄ 4 ”, 3 ⁄ 8 ”, 1 ⁄ 2 ” • IP65 Sealed Cap Nut
2
CONDENSATE DRAINS
HIGH-PRESSURE DRAIN VALVE
Our High-Pressure Drain Valves offer all the features of our standard drain valve at pressure ratings up to 4,000 psi.
AVAILABLE PRESSURE RATINGS • 725 psi • 1,500 psi • 4,000 psi Other pressure ratings available on request
PILOT-OPERATED DRAIN VALVE
1
Our Pilot-Operated Drain Valves have a larger 11mm orifice for a higher drain rate
2
HIGHLIGHTED FEATURES 1 Electronic Timer 2 Power Lead (2m) with Plug
3
4
3 Filter Ball Valve 4 Forged Brass Pilot-Operated Solenoid Valve
ADDITIONAL FEATURES
• Completely assembled, ready to install • Adjustable time scales to suit any condensate discharge times
• Drain test switch • Forged brass direct acting solenoid valve
• Viton seals • High-precision stainless steel internals
3
CONDENSATE DRAINS
BOX VALVE
1
2
3
Our Box Valves feature a switch indicator light that illuminates when the valve is in the open position.
4
ADDITIONAL FEATURES
HIGHLIGHTED FEATURES 1 Adjustable ON/OFF Time 2 Manual Override Switch 3 Power Lead (2m) with Plug 4 Forged Brass Solenoid Valve (also available with an Integrated Combi Valve)
• Completely assembled, ready to install • Adjustable time scales to suit any condensate discharge times • Drain test switch • Forged brass direct acting solenoid valve • Viton seals • High-precision stainless steel internals
CUSTOMIZABLE OPTIONS
Along with our standard product configuration, we also offer an extensive range of customizable options to suit your needs. These include the following:
Private labeling including customer logo and colors
Illuminated Power Lead
FBV fitted with Vented Cap Nut
Filter Ball Valve
4
CONDENSATE DRAINS
ELECTRONIC NO-LOSS DRAIN VALVE
2
1
Our Electronic No-Loss Drain Valves features a level-sensing drain switch that helps remove harmful condensate from receiver tanks, aftercoolers, dryers, filters and drip legs.
3
HIGHLIGHTED FEATURES 1 Test Facility 2 Status Display
3 Inlet Ports x2 ( 1 ⁄
2 ” or
3 ⁄
4 ”)
4
4 Outlet ( 3 ⁄
8 ” or
1 ⁄
2 ”)
ADDITIONAL FEATURES
• 100% continuous duty • Drain test switch • Forged brass direct acting solenoid valve
• Completely assembled, ready to install • Fully automatic in a rugged,compact form
• High-precision stainless steel internals • Viton seals
No-Loss Drain Product Selection Tool
How to Use the NLD Product Selection Tool Locate your compressor horsepower (for multiple compressors use the total system horsepower) or the total flow rate in the compressed air system. Follow the row to the column of the particular install point for the correct model for your application. For example, a system with a total compressor horsepower of 150 HP requiring a drain installed at the after-cooler calls for model 300-01-050. This table is intended as a guideline only. It is important to consider climate variations and how different pressures, humidity levels, and flow fluctuations affect selection.
Typical Percent of System Condensate (by location)
Compressor
55%
10%
10%
20%
2.5%
2.5%
HP
CFM After-Cooler
Wet Receiver Tank Pre-Filter
Refrigerated Dryer
After-Filter 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005
Dry Receiver Tank
Up To 20
90
300-01-005 300-01-005N 300-01-005N 300-01-015 300-01-015 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050 300-01-150 300-01-150 300-01-150 300-01-150 300-01-150
300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005N 300-01-005N 300-01-005N 300-01-005N 300-01-005N
300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005N 300-01-005N 300-01-005N 300-01-005N 300-01-005N
300-01-005 300-01-005 300-01-005 300-01-005N 300-01-005N 300-01-015 300-01-015 300-01-015 300-01-015 300-01-015 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050 300-01-050
300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005 300-01-005
40 50 60 75
180 225 270 338 450 563 675 788 900
100 125 150 175 200 250 300 400 500 750
1,125 1,350 1,800 2,250 3,375 4,500 6,750
1,000 1,500
5
CONDENSATE DRAINS
MECHANICAL NO-LOSS DRAIN VALVE
1
1
Our Mechanical No-Loss Drain Valves offer no air loss with no electric supply required.
1
2
HIGHLIGHTED FEATURES 1 Inlets x3 2 Manual Test Facility 3 Outlet
3
ADDITIONAL OFFERINGS
The Digital Drain Valve timer provides ultimate drain open/close flexibility.
The Solenoid Valve Timer automates the ON/OFF time of the solenoid valve in any pneumatic system.
NEW ITEM
The pivoting Ball Valve controls the flow of liquid or gas by way of a rotary ball with a bore in the center and a rotating stem on top to open or close the valve.
6
CONDENSATE DRAINS
MOTORIZED BALL VALVE
Our Programmable Motorized Ball Valves offer users a non-block approach to condensate removal from compressed air systems.
FEATURES • For use where large particles may block other drain valves • Available sizes: 1 ⁄ 4 ”, 3 ⁄ 8 ”, 1 ⁄ 2 ”, 3 ⁄ 4 ”, 1”, 1 1 ⁄ 2 ” • Programmable timing (non-programmable versions available)
FILTER BALL VALVE
Our Filter Ball Valves feature internal stainless steel filters and filter screens.
FEATURES • Stainless steel filter screens • Output sizes: 1 ⁄ 8 ”, 1 ⁄ 4 ”, 3 ⁄ 8 ”, 1 ⁄ 2 ” • Optional vented cap nut available
7
THE ORIGINAL CREATOR OF THE SOLENOID VALVE DRAIN TIMER Powerflow Electronics was established in 1982, specializing in designing, developing, and manufacturing of electronic control and automation equipment for industrial and commercial applications, with a particular emphasis on the compressed air industry. LEADER IN CONDENSATE MANAGEMENT FOR OVER 40 YEARS With more than 40 years experience, Powerflow has become the supplier of choice for all the world’s leading Compressed Air equipment OEMs. The form and function of our Solenoid Valve Drain Timer have become the industry standard in Solenoid Drain Timers.
v2.0 1-25-2024
Clean Resources | 1540 Louis Bork Drive, Batavia, IL 60510 | 800-566-0402 | cleanresources.com | sales@cleanresources.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Made with FlippingBook - Share PDF online