GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
c. How to bend (coil bending radius) in accordance with work instructions
d. End protection caps are only to be removed just before the cable is connected to the individual processor.
a. Mounting of ferrules
b. Mounting in clamp and screw terminals
c. Shield termination types.
a. Mounting of cable lugs on busbar (correct torque)
b. Mounting of cable to connectors (correct torque)
The participants shall:
a. Insulation in terminal & loose cores
b. In correct torque – generates heat
c. Poor crimping – all kinds of scenarios.
a. Cable and conductor
b. Cabinet (diagram)
a. Bending radius
b. Distance between cables types and groups
c. Fastening of cables: fixed vs flexible
d. Cable protection tubes or edge protection
e. Cable glands.
a. Mounting of ferrules
b. Mounting in clamp and screw terminals
c. Shield termination types.
Global Wind Organisation www.globalwindsafety.org
138 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online