GWO BTT v6.0

GWO Basic Technical Training V6.0

2021-04-01_TS_BTT_V06

EQUIPMENT LIST

The equipment required for training must be available and must fulfil national legal requirements where applicable. The tools, materials and equipment are needed for the execution of the modules are listed in the following pages. Any equipment used during the GWO training modules shall meet or exceed the minimum requirements of the national standards listed in table A3-1 to A3-4. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards. Each participant shall have access to a tool kit which contains sufficient tools for them to be able to complete the exercises as detailed in the module.

Each participant shall be provided with PPE appropriate to the task they are performing.

Note:

All equipment shall be maintained and where appropriate, inspected and tested in accordance with current national Standards/legislation and manufacturers’ recommendations.

Note: There is no need to calibrate the tools as long as this is not compromising safety and the tools are maintained . In this case the tools must be tagged “NO CALIBRATION. ONLY FOR TRAINING” or similar, so that the user knows that the tools are only allowed to be used for training purposes.

Global Wind Organisation www.globalwindsafety.org

150 / 158

Made with FlippingBook - professional solution for displaying marketing and sales documents online