GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
5.3
Temperatures
5.4
Position sensors
5.5
Other sensors TOTAL
90 min.
6
Electrical circuits
6.1
Symbols and diagrams
6.2
Assembly of an electrical circuit TOTAL
120 min.
7
Electrical measuring instruments
7.1
Symbols and settings on electrical measuring instruments How to measure with electrical measuring instruments
7.2
7.3
Measuring points TOTAL
70 min.
8
Summary and Theoretical test
8.1
Summary
8.2
Theoretical test TOTAL Training review TOTAL
30 min.
9
Training
9.1
15 min.
GRAND TOTAL
595 min.
(if done after Mechanical)
570 min.
Table 10-4 - GWO BTT Electrical module timetable
10.5 Learning outcomes of the BTT Electrical Module
The learning outcomes specified for the BTT Electric Module are:
INTRODUCTION
30 min. (5 min. if done after other BTT module)
The aim of this lesson is to enable the participants on the GWO BTT Electrical Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training
NOTE: If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated.
After successfully completing this lesson of the BTT Electrical Module, participants will be able to:
Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
Name and point out local emergency procedures and facilities (Knowledge, basic level)
Global Wind Organisation www.globalwindsafety.org
53 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online