GWO BTT v6.0

GWO Basic Technical Training V6.0

2021-04-01_TS_BTT_V06

11 Module 3 - The BTT Hydraulic Module

11.1 Aims and objectives of the BTT Hydraulic Module

The aim of the BTT Hydraulic Module is to give the participants the knowledge and skills to carry out basic hydraulic tasks (supervised by an experienced technician), using safe working procedures and the correct PPE.

After having successfully completed the BTT Hydraulic Module, participants will be able to:

Explain the basics of hydraulics (Knowledge, intermediate level)

Explain risks and hazards associated with hydraulic work (Knowledge, intermediate level)

Describe the function of different types of pumps (Knowledge, basic level)

Perform check of start/stop pressure of a pump (Skills, intermediate level)

Describe the function of different types of actuators (Knowledge, basic level)

Explain the function of different types of valves (Knowledge, intermediate level)

Describe the function of accumulators (Knowledge, basic level)

Perform check and precharge of accumulators (Skills, intermediate level)

Describe the function of different types of sensors (Knowledge, basic level)

Recognise the components that transfer the oil (Knowledge, basic level)

Describe the handling of oil procedures (Knowledge, basic level)

Recognise and find different components on a hydraulic diagram (Knowledge, basic level)

Perform the accurate measurement of the hydraulic pressure (Skills, intermediate level)

11.2 Duration of the BTT Hydraulic Module

The total contact time for completing this BTT hydraulic module is estimated to be 8.92 hours. This is based on the time estimate given in the module timetable.

The training provider must not exceed the times per day given in table 11-2 below.

The training provider must ensure that sufficient time is allowed for participants with prior experience to share their experiences related to the module in a way that is constructive for the entire class.

Maximum duration per day

Contact time

8 hours

Total training day

10 hours

Table 11-2 - Maximum duration for training days

Global Wind Organisation www.globalwindsafety.org

78 / 158

Made with FlippingBook - professional solution for displaying marketing and sales documents online