GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
Note:
Contact time includes completion of course lesson content, practical exercises, and activities directly related to these .
The total training day includes contact time, meals and breaks and travel between training sites (where applicable)
11.3 Equipment
The equipment required for training as listed in Annex 3 must be available and must fulfil national legal requirements of the country where the training is taking place.
11.4 BTT Hydraulic Module Timetable
Within the module timetables, the approximate duration of each of the lessons is given. The training provider may choose to deliver elements of the training according to other timetables, as long as the total duration is not reduced and practical elements are not reduced in length. Theoretical elements may be delivered during the practical exercises, when feasible.
The order in which the elements of the training module are delivered may vary.
Approx. duration
Lesson
Element
1
Introduction
1.1
Safety instructions and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Aim and objectives
1.5
On-going assessment
1.6 1.7
Motivation Human factor TOTAL
(as stand-alone)
30 min. 5 min.
(if done after other BTT module)
2
Hydraulic introduction
2.1
The hydraulic system
2.2
Pascal’s Law TOTAL
30 min.
3
Hydraulic safety
3.1
Why hydraulic safety?
3.2
High pressure systems
3.3
Stored energy
3.4
Safety signs
3.5
Chemicals
3.6
Types of PPE
3.7
The importance of appropriate isolation TOTAL
60 min.
Global Wind Organisation www.globalwindsafety.org
79 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online