GWO Basic Technical Training V6.0
2021-04-01_TS_BTT_V06
TOTAL
15 min.
GRAND TOTAL
535 min. 510 min.
(If done after other BTT module)
Table 11-4 - BTT Hydraulic module timetable
11.5 Learning outcomes of the BTT Hydraulic Module
The learning outcomes specified for the BTT Hydraulic Module are:
INTRODUCTION
30 min. (5 min. if done after other BTT module)
The aim of this lesson is to enable the participants on the GWO BTT Hydraulic Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training
NOTE:
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated.
After successfully completing this lesson of the BTT Hydraulic Module, participants will be able to:
Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
Name and point out local emergency procedures and facilities (Knowledge, basic level)
Describe the relevant human factors and the implications thereof (Knowledge, basic level)
ELEMENT 1.1 - SAFETY INSTRUCTIONS AND EMERGENCY PROCEDURES
Learning objectives:
The participants can recognise the safety instructions, rules and emergency procedures (Knowledge, basic level) The participants show an interest or curiosity in the safety and emergency procedures (Ability, basic level)
The instructor shall:
a. safety instructions according to internal procedures
b. emergency procedures and emergency exits in the areas where the participants can be expected to be located during the module
Global Wind Organisation www.globalwindsafety.org
81 / 158
Made with FlippingBook - professional solution for displaying marketing and sales documents online