SumiTurn T-REX Toolholders
External Profiling Double Clamp
93°
Fig 1
DTR55C External / Profiling
–5˚
LH
LF
–7˚
Figure shows right-hand (R) tool.
C
Holder
Parts
Dimensions ( mm )
Cap Screw
Shim Screw
Shim Wrench
Cutting Edge Height
Stock
Clamp Spring
Shim
Wrench
Overall Length
Cutting Edge
Height Width
Head
Cat. No.
Fig
R L
N m
H B LF WFHF LH
(For Hex Socket) (For Torx Holes)
l l .750 .750 4.50 1.00 .750 1.375 1
DTR55C R/L 123B
DTR55C R/L 163D l l 1.00 1.00 6.00 1.25 1.00 1.375 1 DTR55C R/L 2020-K17 « « 20 20 125 25 20 35 1 DTR55C R/L 2525-M17 « « 25 25 150 32 25 35 1 Wrench for shim is sold separately from the main body. S-DTR55C Type:
3.5 to 4.5
TRCP3 S-SP4-20 BX0520
TRW5505 BFTX0307N TSW040 TRX10
E27
Internal Pro ling
External Profiling Double Clamp
105˚
Fig 1
DTR55Q External Turning and Face Profiling
C
–8˚
LH
–8˚
LF
D
Figure shows right-hand (R) tool.
R
Holder
Parts
Dimensions ( mm )
Cap Screw
Shim Screw
Shim Wrench
Cutting Edge Height
Stock
Clamp Spring
Shim
Wrench
Overall Length
Cutting Edge
Height Width
Head
Cat. No.
Fig
S
R L
N m
H B LF WFHF LH
(For Hex Socket) (For Torx Holes)
l l 1.00 1.00 6.00 1.26 1.00 1.378 1
DTR55Q R/L 163D
3.5 to 4.5
DTR55Q R/L 2020-K17 « « 20 20 125 28.5 20 35 1 DTR55Q R/L 2525-M17 « « 25 25 150 32.0 25 35 1
TRCP3 S-SP4-20 BX0520
TRW5505 BFTX0307N TSW040 TRX10
T
■ Features
● T-REX Insert/Tool Holder Identification
1.5 times more cutting edges compared to DNMG inserts, for greatly reduced machining costs • 55° Included Angle with 6 Cutting Edges
Powerful clamping with double clamp- on lock and serrated insert design • Extra-Strong Clamping ↓
Insert
TRM 55 08 -GU 17
V
T-REX Insert
Angle
Nose Radius
Name of Chipbreaker
Insert Size
· Prevents the cutting edge position from shifting during profiling · Reliable even in interrupted machining
External Holder
DTR 55
17 C R 2525 -M
«
Angle
Feed Direction
Shank Length
T-REX Holders
W
Cutting Edge Angle
Shank Size
Insert Size
Note: Cutting Edge Angle C: 93° (95.5° for major cutting edge) Q: 105° (107.5° for major cutting edge)
55° Angle
■ Important Notes
Double Clamp-on Lock
● Cutting Edge Angle
● Depth of Cut
● Tightening Torque
Serration
B
2.5mm or below
A
For the insert clamp, use the included dedicated wrench (TSW040) to tighten at 3.5 to 4.5N·m torque.
A B
Note
Holder Cat. No.
Maximum depth of cut should be 2.5mm.
93° 27°
DTR55C Type
Main blade cutting edge angle is 95.5°
C27
DTR55Q Type
Main blade cutting edge angle is 107.5°
15° 105°
« = World Wide Warehouse Item
l = USA Stocked Item
N m Recommended Tightening Torque (N·m)
Made with FlippingBook Ebook Creator