Boring Bars S-SWUP Type
Internal Finishing (Small Diameter) Screw-on
Steel
93˚
DMIN Min. Bore Dia.
S-SWUP Through Boring
Fig 1
DCON
93˚
H
LF
GAMF
5°
E
LHD
Figure shows right-hand (R) tool.
Holder
Parts
Dimensions ( mm )
Applicable Insert
Stock Min. Bore Dia.
Flat Screw Wrench
Cutting Edge Distance
Rake Angle
Overall Length
C
Head
Diameter Height
Cat. No.
Fig
R L
Cat. No.
N m
DMIN DCON H LF WF LHD GAMF
(For Torx Holes)
S12M-SWUP R/L1102-14 « « S16Q-SWUP R/L1102-18 « « S16Q-SWUP R/L1603-18 « « S20R-SWUP R/L1603-22 « «
14 18 18 22
12 11 150 16 15 180 16 15 180
7 17 9 18 9 18
-6° -3° -3° -2°
1 1 1 1
WP □□ 21.5 □
BFTX02505N 1.1 TRX08
D
Steel
B129
WP □□ 32 □
3.4 TRX15
BFTX0407N
20 18 200 11 18
Right-handed (R) tool holders are compatible with left-handed (L) or neutral (N) inserts. Left-handed (L) tool holders are compatible with right-handed (R) or neutral (N) inserts.
R
S
T
V
W
Applicable Inserts S-SWUP Type
Name of Chipbreaker/ CBN/PCD Photo
EGU
● Refer as well to the Insert Selection Guide (page A10 on). ● Some combinations need to be made to order or cannot be manufactured.
1st Recommended Insert
AC8025P
Grade
P (Steel) M (Stainless Steel) Medium Cutting Medium Cutting
Cutting Range
Process
LB
LB
General Cutting
AC8025P
AC6030M
Recommended Cutting Conditions
A10 on A14 on
• USA Stocked Item « Worldwide Warehouse Item ▲ USA Limited Availability Item
N m Recommended Tightening Torque (N·m)
E63
Made with FlippingBook Ebook Creator