Cut-off Tool Holders Selection Guide
Cut-off
140
WCFH32 Type Carbide Holder
120
100
STFH32 Type Steel Holder
80
WCFH26 Type Carbide Holder
STFH26 Type Steel Holder
STFS Type Steel Holder
60
GNDL Type
WCFS Type Carbide Holder
GNDL-J Type Internal Coolant Supply GNDM-J Type Internal Coolant Supply
GNDL Type For Small Lathes
F
40
GNDM Type
20
GNDM Type For Small Lathes
SCT Type
4
5
6
7
8
9
0
1
2
3
Groove Width (mm)
■ Range of Tool Applications (For Solid Workpieces)
Cut-off Dia. Groove Width
25
50
75
100 (mm)
Series
Shape
Insert Shape ( ): indicates no. of cutting edges
Features
2
4
6
8
10 (mm)
SCT
· Ground insert with good sharpness · Can clamp even from behind · 2-cornered type
16.0
(2)
2.0
In Stock: Right Left Neutral
0.5
GNDM/ GNDL For Small Lathes
· High-rigidity design and outstanding chip control · Unground 2-cornered type Available with widths starting at 1.25mm
32.0
1.25
3.0
(2)
GNDM(-J)/ GNDL(-J)
In Stock: Right Left Neutral
· High-rigidity body, rigid clamping · Outstanding chip control · Unground 2-cornered type
50.0
2.0
8.0
STFH/ STFS (SumiGrip Jr.)
· Can be used for large diameter machining up to ø100mm · Economical steel shank · 1-cornered self-grip type · Can be used for large diameter machining up to ø140mm · High-rigidity carbide shank · 1-cornered self-grip type
100.0
(1)
2.0
5.0
In Stock: Right Left Neutral
WCFH/ WCFS
140.0
(1)
(SumiGrip)
2.0
5.0
In Stock: Right Left Neutral
■ Cut-Off Tool Series Small Diameter Cut-Off Tool Holders SCT Type
· Our first recommendation for small lathes · Excellent sharpness reduces cutting resistance and central pips!
Cut-off Tool Holders GND Type (GNDM(-J) Type / GNDL(-J) Type)
· Our first recommendation for small to medium diameters · Enables stable cutting off due to high-rigidity body and rigid clamping · Our first recommendation for medium to large diameters · Blade type is also available for cutting off up to ø140mm
Cut-off Tool Holders SumiGrip Jr. Steel Shank
SumiGrip Carbide Shank
F49
Made with FlippingBook Ebook Creator