SEC-Sumi Dual Mill DGC Type
■ General Features SEC-Sumi Dual Mill DGC Type employs double-sided inserts with up to 16 corners for excellent economy. This is a general-purpose cutter featuring high cutting edge strength for high efficiency milling and a low-burr chipbreaker design that provides high machined surface quality.
ONMT / ONET Type (Double-sided, 16 Corners)
includes
Type ins ert lineup
The DGC double-s
H
T/SNET
ided SNM
ypes.
T/ONET t
SNMT / SNET Type (Double-sided, 8 Corners)
and ONM Up to 16
d
an be use
corners c
Ŷ Features
omy.
ved econ
for impro
Ɣ Same cutting performance as single-sided inserts plus superior economy Achieves levels of cutting edge sharpness and machined surface quality equivalent to single-sided cutters at a maximum depth of cut of a p = 0.12”.
Ɣ Recommended Cutting Conditions for General Steel
Ɣ Comparison of Cutting Force
0.24
Equivalent Level of Cutting Force
3,000
Higher Efficiency
0.20
WGX Type / WGC Type
2,000
0.16
SNMT 13T6ANER
0.12
1,000
DGC Type
0.08
0
ONMT 05T6ANER
0.04
DGC Type
DGC Type
WGC Type
(SNMT)
(ONMT)
Work Material: 4130 Structural Steel Tool: ø4.000” Cutting Conditions: v c = 650 SFM, f z = 0.012 IPR, a
0
0.004 0.008 0.012
0.020
0.016
a
p = 0.12”,
e = 3.35”
f z (IPT) Feed Rate per Tooth
Ɣ Common Body Features Two types of inserts can be used with a single body depending on the milling application, to help reduce tool costs.
Use two types of insert for different applications
Seat protects the body
SNMT / SNET Type · Stronger than single-sided cutters · Economical double-sided design gives double the number of cutting edges of standard inserts (Maximum depth of cut = 0.24”) (M S · ·
ONMT / ONET Type · More economical double-sided design with 16 corners (Maximum depth of cut = 0.12”)
● Choose a tool to suit your application from a comprehensive lineup
ø40 mm to ø250 mm Cutter Diameter: ø2.000” to ø10.000”
Cutter Diameter: ø2.000” to ø8.000”
Cutter Diameter: ø2.000” to ø8.000”
Cutter Diameter: ø2.000” to ø2.500”
ø50 mm to ø250 mm No. of Teeth: 4 to 14 Mounting: Metric/Inch
ø50 mm to ø250 mm No. of Teeth: 5 to 18 Mounting: Metric/Inch
ø40 mm to ø63 mm No. of Teeth: 3 to 4 Mounting: Metric
No. of Teeth: 3 to 10 Mounting: Metric/Inch
DGC40000R DGC13000R(S) DGC13000R( S) Standard Pitch
DGCF40000R DGCF13000R(S) Extra Fine Pitch
DGCM40000R DGCM13000R(S) Fine Pitch
DGC 13000EW DGC 40000EW Endmill Type
H28
Made with FlippingBook Ebook Creator