SEC-WaveMill WFX Type
■ Grade Application Range
Work Material Grade Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting
Work Material
Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting Grade
ACP100 C
C
ACK200
ACP200
Cast Iron
ACK300
P
Steel
P
ACP300
P
DL1000
P
C
ACM200
H
Non-Ferrous Metal
H1
Stainless Steel
ACM300
P
C
The letters "C" and "P" at the end of each grade indicate the coating type.
: CVD,
: PVD, Blank: Uncoated
P
■ Chipbreaker Selection
P
K
N
M
Part Material
Exotic Alloy
L
L Type
G Type
H Type
Wiper Insert
S Type
↑
General-purpose (Standard)
Light Cutting
Chipbreaker
G
H
Features Low Cutting Force General-purpose Type High Strength Type
Wiper Edge
Sharp Edge
Cutting Edge Cross Section
10°
20 °
15°
25°
15°
Heavy Cutting
Cutting Edge Strength → Large
Light Cutting, Low Rigidity Milling and Reduction of Burrs
Main Chipbreaker General Purpose to Interrupted Milling
Roughing, Heavy Interrupted Cutting and Hardened Steel Milling
Applications
High-precision Finish
For Non-Ferrous Metals
■ Wiper Insert
Optimized wiper edge shape provides superior surface roughness.
Precautions when Using Wiper Inserts
(1)
M Class Inserts
● The wiper insert has a single corner specification. ● Place the wiper insert so that the chamfered corner is in location (1) shown in the figure. ● Use the corner with the ID mark. (2) (08-size inserts have no marks) ● Refer to page N55 for details about wiper inserts.
Wiper inserts are 0.006 in longer than M Class inserts
(2)
Wiper Edge
■ Cutting Conditions
Cutting Speed vc (SFM/m/min) Min.-Optimum-Max
Feed Rate fz (IPT/mm/t) Min.-Optimum-Max
D.O.C. (In/mm)
Part Material General Steel
ISO
Grades
492-656-820 0.004-0.006-0.008 < 0.394 ACP200 ACP300 150-200-250 0.10-0.15-0.20 < 10.0 591-869-1148 0.004-0.006-0.008 < 0.394 ACP200 ACP300 180-265-350 0.10-0.15-0.20 < 10.0 328-492-656 0.004-0.006-0.008 < 0.236 ACP200 ACP300 100-150-200 0.10-0.15-0.20 < 6.0 175-425-675 .004-.006-.008 < 0.394 ACM200 55-130-300 0.10-0.15-0.20 < 10.0 ACM200 525-650-820 .004-.006-.008 < 0.394 ACM300 160-200-250 0.10-0.15-0.20 < 10.0 ACM300 525-672-820 0.004-0.006-0.008 < 0.394 ACP300 160-205-250 0.10-0.15-0.20 < 10.0 328-574-820 0.004-0.006-0.008 < 0.394 ACK200 ACK300 100-175-250 0.10-0.15-0.20 < 10.0
P
Soft Steel
Die Steel
Stainless Steel
M
K Cast Iron
H86
Made with FlippingBook Ebook Creator