SEC-Sumi Dual Mill DFC Type ■ Insert Grade
Lineup of Steel Milling Grades ACP100/ACP200/ACP300, Stainless Steel Milling Grades ACM200/ACM300, Cast Iron Milling Grades ACK200/ACK300 and more for a wide range of materials.
H
Part Material Finishing to Light Cutting
Rough to Heavy Cutting Medium Cutting
- Compared to conventional tools, the coating hardness has been increased by 40% and the oxidation starting temperature has been increased by 200°C - Enables more than 1.5 times the machining speed and efficiency of conventional tools - Achieves more than double the tool life of conventional tools - Achieves excellent chipping resistance with smooth coating and our coating stress control technology - High-speed, high-efficiency machining at a level more than 1.5 times higher than conventional tools is possible with a high hardness coating layer
New Super ZX Coat
C
ACP100
Super ZX Coat
Laminating Cycle UpTo10nm
ACP200
ZX Coat
P
Steel
ACP300
P
10nm
C
ACM200
Oxidisation Starting Temperature (°C) Film Cross-Section (TEM Image)
Stainless Steel
ACM300
P
C
ACK200
Coating Hardness: 30% Increase Surface Roughness: 50% Reduction
Super FF Coat
Cast Iron
ACK300
Alumina
P
C
ACM200
TiCN
Exotic Alloy
ACM300
Conventional coating
P
- Achieves more than double the tool life of conventional tools
The letters "C" and "P" at the end of each grade indicate the coating type.
Substrate
C
Cross-section of Coating
TiCN Surface Roughness Ra (μm)
: CVD
: PVD
P
LType
GType
GSType
HType
Chipbreaker
20°
20°
20°
30°
Cutting Edge Cross Section
.016, .032
.016, .032, .472, .063
.016, .032, .472, .063
.032, .472, .063
Nose Radius (in. / mm )
0.4, 0.8
0.4, 0.8, 1.2, 1.6
0.4, 0.8, 1.2, 1.6
0.8, 1.2, 1.6
Heavy Cutting, Heavy Cross-Section Machining and Hardened Steel Milling
Light Cutting, Low Rigidity Milling, Reduction of Burrs
Face Milling General-purpose to Interrupted Milling
Features and Applications
Shoulder Milling
H99
Made with FlippingBook Ebook Creator