SEC-Sumi Power Mill PWS(F) Type / PWSR Type
■ General Features A highly reliable shoulder milling cutter with strong, sharp cutting edge and tangential inserts.
PWSR Type, with a 2-stage insert array structure supporting large depths of cut, has been added to the lineup.
H
■ Features
● Tangential inserts with excellent cutting edge strength and optimized breaker provide superb cutting edge and sharpness. ● Serrated insert design created with high-precision formation technology allows stable milling and low chatter even in applications with large tool overhang. ● ACP and ACK series allow a wide range of materials to be covered.
■ Performance
● General-purpose G Type Insert Performance Comparison
Comparison of Cutting Edge Strength Strong cutting edge delivers superb stability
Comparison of Cutting Force Sharpness approaching that of screw-on inserts
40
3,000
1st Time 2nd Time 3rd Time
Principal Force Feed Force Back Force
2,500
32
○ : No Breakage, Good Cutting Edge × : Damaged, Unusable Cutting Conditions v c =492 SFM f z =0.008 IPT a e =0.12” a p =0.40” Dry Work Material: S50C Tool Diameter: 80mm
2,000
24
1,500
Cutting Conditions v c =492 SFM f z =0.008 IPT a e =0.12” a p =0.40” Dry Work Material: S50C Tool Diameter: 80mm
16
1,000
8
500
0
0
SumiPower Mill PWS Type
Competitor's Product A (Screw-on)
Competitor's Product B (Vertical)
Competitor's Product B (Vertical)
SumiPower Mill PWS Type
Competitor's Product A (Screw-on)
● Serrated R Type Insert Performance Comparison
Comparison of Cutting Force Reduced cutting power and excellent chatter resistance
Serrated R Type Insert General-purpose G Type Insert
7,000
R Type G Type
Reduced by 25%!
6,000
5,000
ips!
4,000
ll ch
Sma
3,000
Cutting Conditions v c =656 SFM f z =0.006 IPT a e =0.80” a p =0.40” Dry Work Material: S50C Tool Diameter: 100mm
2,000
1,000
0
General-purpose G Type
Nicked R Type
1) Precautions when Mounting When using the serrated R type indexable inserts, mount them so that the serrated grooves alternate as shown in the image on the left. 2) Precautions for Cutting Conditions As these are mounted as in the image on the left, compared to mounting inserts of the same shape for all blades, the feed rate per tooth is doubled. Accordingly, f z = 0..010 IPT feed rate is set as the upper limit and can be adjusted for use. Ex.) For use with f z = 0.2mm/t With all regular blades: Feed Rate per Tooth 0.008 IPT With serrated types: Feed Rate per Tooth 0.016 IPT
Serrated R Type Insert Usage Precautions
4 notches (Corners (1) and (4))
(3)
(4)
(4)
3 notches (Corners (2) and (3))
(3)
(3)
(4)
Using inserts incorrectly may damage tools.
H134
Made with FlippingBook Ebook Creator