SEC-WaveMill WFXC Type
■ General Features The SEC-WaveMill WFXC Type is a chamfering tool that uses a WFX series insert. A wide variety of grades support various work materials.
H
■ Grade Application Range
Work Material Grade Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting
Work Material
Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting Grade
C
C
ACP100
ACK200
Cast Iron
ACP200
ACK300
P
Steel
P
ACP300
P
DL1000
P
C
ACM200
Non-Ferrous Metal
Stainless Steel
H1
ACM300
P
C
The letters "C" and "P" at the end of each grade indicate the coating type.
: CVD,
: PVD, Blank: Uncoated
P
■ Precautions for Use Chamfering tools use a straight cutting edge that enables the chamfering range to be changed depending on the nose radius (RE) of the insert mounted to the body. Work diameter: Use within the range shown in the table below, no lower than DC1 and no higher than DC2. Depth of cut: cutting to a depth shown by the distance from the tool tip (a) in a straight line to the cutting edge. (b) is possible.
Dimensions (mm)
Min. Machining Dia. Min. Machining Dia. Minimum Depth Maximum Depth Maximum Dia.
Insert
Body
Cat. No.
RE DC1 DC2
a
b
DCX
SOMT080304 0.4 7.5 15.8 0.1
4.1
17.8
WFXC08008E
SOMT080308 0.8 8.0 15.8 0.2
3.9
17.5
SOMT080312 1.2 8.5 15.8 0.4
3.6
17.2
SOMT080304 0.4 15.5 23.8 0.1
4.1
25.8
45°
WFXC08016E
SOMT080308 0.8 16.0 23.8 0.2
3.9
25.5
SOMT080312 1.2 16.5 23.8 0.3
3.6
25.2
b
SOMT120404 0.4 24.6 38.3 0.1
6.8
41.3
SOMT120408 0.8 25.0 38.3 0.2
6.6
41.0
WFXC12025E
a
SOMT120412 1.2 25.6 38.3 0.4
6.3
40.7
DC1
SOMT120416 1.6 26.1 38.3 0.5
6.1
40.4
SOMT120404 0.4 31.6 45.3 0.1
6.8
48.3
DC2
SOMT120408 0.8 32.0 45.3 0.2
6.6
48.0
WFXC12032E
DCX
SOMT120412 1.2 32.6 45.3 0.4
6.3
47.7
SOMT120416 1.6 33.1 45.3 0.5
6.1
47.4
H174
Made with FlippingBook Ebook Creator