Cutter for QC System Applicable Cutters
■ Quick-F QF Type Cutter Specifications
■ Two-Piece Cutter with Centre Bolt ● Appearance
4-ø3 Spring Pin
SNT2
D2
DBC1
12
H
8
7
CBDP
Dimensions (mm)
Dia. Bolt Bolt Diameter Hole position Hole position Key Groove Width Mounting Depth DCB D2 D3 D4 DBC1 DBC2 SNT2 CBDP 31.75 22 43.75 43.5 37.75 55 20 24 38.10 29 50.10 49.8 44.10 55 22 22 50.80 41 62.80 62.5 56.80 68 26 22
Cutter Size (mm)
● Adapter Specifications
ø100
ø125 ø160
ø101.6 BDX ø177.8
This design applies to all F type high-feed cutters ( → H234 to H237). Conventional cutter can be easily adapted to quick change through slight modification.
DCB 25.4
ø18
D2
Cutter Setting
■ QAD Cutter (Two-Piece Type) Specifications
D1
ø26
DMM
DBC
DBC
Cutter Removal
D2
Dimensions (mm)
Shank Max. O.D. Bore Dia. Bolt Bolt Hole Position Cutter Size (mm) DMM BDX DCB D1 D2 DBC
Cat. No.
NQAD 200
— — — —
47.625
155 ø200 205 ø250
105 180 155 240
DCB
D1
250 315 355 400 450
47.625
DC
47.625
32 22 270 ø315
220 305
Dimensions (mm)
260 345
63.50
32 22 310 ø355
Cutter Size (mm)
Dia. Bore Dia. Bolt Bolt Hole Position Height Bolt Count DC DCB D1 D2 DBC LF
Adapter Cat. No.
63.50
32 22 355 ø400 32 22 405 ø450
305 390 355 440
63.50
ø200 ø250
200 80
24 14 120 40 4 QAD200 30 18 170 40 4 QAD250
● Features and Applications (1) With one clamping bolt, the total weight of the two-piece cutter is lighter. (2) Cutter can be replaced quickly - simply turn one bolt halfway to mount and remove. (3) A tapered spline system is used to connect the adapter to the cutter. (4) Can be used for cutters over ø200.
250 120
ø315
315 180
30 18 230 40 6 QAD315
ø355
355 220
30 18 270 40 6 QAD355
ø400 ø450
400 250
30 18 300 40 8 QAD400
450 300 30 18 350 40 8 QAD450 This design applies to the 2-piece type high-feed cutters ( → H234 to H237).
■ NQAD Cutter (Two-Piece Type with Centre Bolt) Specifications
● Cutter Mounting Diagram
DBC
DCB
DC
Dimensions (mm)
Dia. Bore Dia.Hole Position DC DCB DBC
Cutter Size (mm)
Adapter Cat. No.
ø200 ø250
200 105
155 NQAD200 205 NQAD250
250 155
ø315
315 220
270 NQAD315
ø355
355 260
310 NQAD355
ø400 ø450
400 305
355 NQAD400
450 355 405 NQAD450 This design applies to all two-piece type high feed cutters with a centre bolt ( → H234 to H237).
H235
Made with FlippingBook Ebook Creator