Corner Radius & Ballnose Endmill Selection Guide
¥ : 1st Recommendation, ¥ : 2nd Recommendation, ¡ : Good, Blank: Not recommended, × : Unsuitable
Material
P
H M S K N
Series Name / Series Code
Applications / Features
Diameter
Appearance
DC (Min. to Max.)
inch ( mm )
I
General Endmilling with Corner Radius High Efficiency Endmill with Corner Radius
GSX MILL Radius GSX 40000-R
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¡ ¡
ø3 to 12
GSV Anti-vibration Radius GSV 4000-R SSEH Anti-vibration Radius SSEHVL 4000-R
¡¥¥¥¥¥¡ ¥¡¡
ø3 to 25
¡ ¥
ø4.5 to 16
Exotic Material
SSEH Radius SSEH 4000-R
¡ ¥
ø4.5 to 16
MOLD FINISH MASTER SUMIBORON Radius Endmills BNBR
High-precision Mold Profiling Cemented Carbide and Hard Brittle Material
¡ ¡ ¥ ¥
× ×
ø0.2 to 2
MOLD FINISH MASTER SUMIDIA BINDERLESS Radius Endmills NPDRS
¥
¡
ø0.2 to 2
Cemented Carbide
Hard Brittle Material
¥ : 1st Recommendation. ¥ : 2nd Recommendation, ¡ : Good, Blank: Not recommended, × : Unsuitable
Material
P
H M S K N
Series Name / Series Code
Ballnose Radius
Applications / Features
Appearance
(Min. to Max.)
/
Tolerance
inch ( mm )
R0.2 to 10 .0625-1.00" ± 0.01
GSXMILL Ballnose GSXB
General- purpose
¥¥¥¥¥¥¡ ¥¡¡
Aluminum and Non-Ferrous Metal
DLC - AURORA Coat Ballnose SNB 2000DL
R1 to 8 ± 0.01
¥ ¥
AURORA Coat Long Neck Ballnose Endmills SNB2
R0.05 to 2 ± 0.005 R0.1 to 0.5 ± 0.005 R0.2 to 1 ± 0.005
¥ ¥
Copper Electrodes
MOLD FINISH MASTER SUMIBORON Ballnose Endmills BNBC MOLD FINISH MASTER SUMIBORON Ballnose Endmills BNBP SUMIBORON Endmills BNBS
¥
¡ ¡ ¥ ¥
× ×
High- precision Mold Profiling
R1 to 6 ± 0.02
¡ ¡ ¥ ¥
× ×
R0.1 to 1 MOLD FINISH MASTER
SUMIDIA BINDERLESS Ballnose Endmills NPDBS (For Standard Finishing)
¡
¥
Cemented Carbide
Hard Brittle Material
Cemented Carbide and Hard Brittle Material
R0.1 to 1 MOLD FINISH MASTER SUMIDIA BINDERLESS Ballnose Endmills NPDB (For Precision Finishing) R0.5 to 1 SUMIDIA Coat Ballnose Endmills SDCB
¡
¥
Cemented Carbide
Hard Brittle Material
¡
¥
Cemented Carbide
Hard Brittle Material
I 3
Made with FlippingBook Ebook Creator