Flat Bottom Drills MDF Type
■ General Features The flat multidrill MDF type is a solid carbide drill that can be used for various applications, including high-efficiency spot facing and drilling in inclined and curved surfaces.
J
■ Features and Applications ● Suited to various types of drilling thanks to a point angle of 180° Can be used for high-efficiency spot facing, drilling in non-horizontal surfaces such as inclined and cylindrical surfaces, and interrupted drilling. Also reduces burrs at the hole exit. ● Improves machining stability Achieves high rigidity by employing RS THINNING, which ensures thick web at the bottom. ● Excellent chip evacuation Achieves excellent chip evacuation thanks to the wide chip pocket and high-quality rake face shape. ● Excellent cutting edge strength Achieves excellent cutting edge strength through optimized cutting edge design. ● Long types available Overhang lengths up to L/D=10 can now be handled. ● Types with oil hole available Coolant can now be supplied internally. This enables deeper drilling.
Improves drilling stability by ensuring web thickness
■ Reduction of Burrs at Hole Exit
Conventional general-purpose drill
Part Material: Alloy Steel Tool: MDF 0500S2D (ø5.0mm 2D) Cutting Conditions: v c =213 SFM, f =0.0047", H =0.393", 150 holes, Wet Machine: Vertical machining center (BT40)
MDF Type
Reduces exit burrs by half compared with general-purpose drills
Height of burr: 0.007”
Height of burr: 0.017”
Flat MultiDrill MDF Type
Conventional general-purpose drill
Burrs at Hole Exit
■ Machining Applications
1
2
3
4
High-efficiency spot facing
Hole expansion drilling
Drilling in non-horizontal surface (inclined surface, cylindrical surface, etc.)
Interrupted drilling
5
6
7
8
Conventional general-purpose drill
MDF Type
Long Type *Prepared hole with same diameter recommended
Long Type *Prepared hole with same diameter recommended
Cross drilling
Pre-tap hole drilling in thin sheets
Spot facing in deep positions
Avoids interference with work material
J44
Made with FlippingBook Ebook Creator