Plunge Drills, Plunge Mills PDL Type / PCT Type
PDL Type
PCT Type
■ General Features Cutting feed in the Z axis direction, where tool rigidity is high, allow high-efficiency, stable roughing for aeronautic components and dies with long tool overhang, where machining efficiency is hard to increase in long neck machining and pocketing.
J
■ Features ● The flat cutting edge design produces near-flat bottom profiles to reduce depth of cut variation during finishing. ● All sizes come with oil holes for supplying coolant internally to improve chip evacuation performance. ● Durable body with special surface treatment offers improved tool life and reliability. ● Utilizing SumiDrill WDX type inserts for handling a wide range of work materials, from steel to non- ferrous metals and exotic alloys.
● Although the PCT type has limited radial depth of cut, the tool has a high effective number of teeth enabling it to perform high feed cutting. (Medium finishing of corners, hole expansion, deep groove processing, etc.)
● The PDL type has a central insert, enabling radial depth of cut beyond the tool's radius, pick feed cutting and drilling. (Pocketing, etc.)
a e
p f
p f
Keep the value of p f for PDL type tools to less than 70% of the tool diameter (DC).
Keep the value of p
f for PCT type tools to less than 50% of the tool diameter (DC).
For a
e, refer to the dimension under " a
e max" in the stock/dimensions table titled
"Holders Max. Depth of Cut: 3D/5D".
J125
Made with FlippingBook Ebook Creator