Our Tool Engineering Centers provide strong support for manufacturing by offering a variety of services tailored to the customer's needs. AMERICA’S TOOLING ENGINEERING CENTER (A-TEC)
Seminars • Level 1, 2 & 3 Turning / Milling / Holemaking / CBN PCD • Sumi University
Seminars
• Tooling Support • Technical
Learn
Level One, Two and Three training seminars are available. We also offer hands-on seminars using machine tools.
Technical Support
Consultation
Connect
Excel
• Latest Measuring Instruments • Troubleshooting • Digital Analysis Support
Cutting Tests We utilize machine tools and measuring instruments to visualize and track down the causes of machining problems and work with our customers to find solutions. Using the technology we have cultivated as a cutting tool manufacturer to propose a wide range of solutions. 1.Latest Measuring Instruments Working with our customers to solve problems. 2.Troubleshooting
Technical Support We support customers in solving problems from optimal machining methods through tool proposa ls and resolution of machining issues. We provide a report and proposal containing the information required on machining sequence, tools, cutting conditions, and so on. 1.Tooling Support Plus
Test Cuts
Tool illustration
Cutting point
Cutting condition
Cutting conditions
Actual machining is visualized and machining status analyzed to compare and record cutting processes numerically. 3.Digital Analysis Support
We offer support using CAM software. Drastically shortening machining time by using a Sumitomo ‘high-feed cutter (example). 2. Technical Consultation
Before 29 min 21 sec
Turning
After 14 min 35 sec
Machining time reduced by 50% Machining time shortened
Current cutter: ø80mm Spindle speed n = 915min -1 , Feed rate per tooth fz = .0079 IPR Feed rate vf = 72 Inches/min, Depth of cut ap = .1181”
DMSW : ø80mm Spindle speed n = 637 min -1 , Feed rate per tooth fz = .059 IPR Feed rate vf = 300 Inches/min, Depth of cut ap = .059”
Made with FlippingBook flipbook maker