Amphenol Socapex │ SL61 & «SOCA»
SL61 & “SOCA” - ACCESSORIES Sealing sleeve
Spray proofing sleeves, made of neoprene, are mounted on the rear of the plug body.
SL61
Sealing sleeve assembly instructions
Straight
Right angled
If necessary, adjust the end of the sleeve to the diameter of the cable in use. Size 10 connectors: cut off part A for cables using the large diameter cable clamp. Size 20-30-40: cut off part A for cables using the middle sized clamp, and parts A and B for cables using the largest diameter cable clamp. The sleeve must not be gripped by the cable clamp. For small diameter cables, parts A and B should be folded back, as shown:
43456 - 44666 - 43457
A
ØB
43473
43458
Grounding discs for 419 AR arrangement
Connector
Size
A MAX
ØB MAX
Designation
Straight
Pin insert: 140654-91 (front mounting)
Socket insert: 140653-00 (rear mounting)
43458
10
32,00
18,20
Right angle
43473
10
39,00
18,20
Straight or right angle
Not available for SLG 419AR series
43456 44666
20 30
56,00 71,00
26,00 37,90
43457
40
86,00
47,30
Adaptator for flexible conduit and PG thread
Adaptator for flexible conduit
ØB
ØC
A
Connector size
PG size
A MAX 33,50 33,50 38,70 38,70 38,70 44,00 44,00 43,00
ØB MAX
ØC MAX
Designation SL RF 2 09N SL RF 2 11N SL RF 3 13N SL RF 3 16N SL RF 3 21N SL RF 4 16N SL RF 4 21N SL RF 4 29N
9
22,20 22,20 30,70 30,70 39,50 39,50 39,50 39,70
24,00 24,00 32,00 32,00 32,00 42,00 42,00 39,70
20
11 13 16 21 16 21 29
30
40
All the dimensions are in mm except as otherwise specified
Due to technical progress, all information provided is subject to change without prior notice Designed by Amphenol Socapex
15
Made with FlippingBook - Online magazine maker