L2 L3
L1
D1
CTOS 00/CTOL 00 “Square Flange” Receptacle rear mount
The square flange receptacle has to be mounted on to the vehicle panel. It provides the link between the inside electro- optic device and the outside optical link. The square flange receptacle receives the first CTOS plug of the outer link patchcord. The square flange type makes it possible to have a high density of receptacles on a panel. Easy panel cut off of 5 round holes. Fixation by 4 screws. - Front sealing ensured by a flat gasket. Electrical contact between panel receptacle and protective cap (EMI,CEM protection when cap is on). Protective cap attached to the panel or to the receptacle by a stainless steel rope. D2 L2 L3 L1
D1
L1
L2
L3
CTOS 00P/CTOL 00P Straight Backshell Receptacle for Pigtails
L7
L4
BACKSHELL MAIN USE : To be used inside a vehicle or on a box to connect CTOS receptacle to the electro-optic transceivers, in a protected area. This rear part makes possible an easy cross connect output. Straight rear part to be used with 1, 2, 4, pigtails (2.8 mm single cable or duplex cable 2 x 3 ,2x 1.6 ). Each pigtail can be terminated with ST, SC, FC, duplex SC and MTRJ connectors. Pigtails tensile strength : 10 daN (depending on cable performance).
D2
D2
L7 SERIES L1 L2L3L4L7Ø D2 CTOS MM* 23 13.6 82 29 49.9 28 CTOS SM** 23 13.6 90.5 38.7 49.9 28 CTOL MM* 27 13.6 96 44 60 51 CTOL SM** 27 13.6 96 44 60 51 L3 L4 L2 L3 L4
L1
L7
L1
L2
SOCAPEX
D2
D2
BACKSHELL MAIN USE : To be used inside a vehicle or on a box to connect CTOS receptacle to the electro-optic transceivers, in non protected area. Unsealed straight backshell to be used with 1 or 2 tactical cables (1,2 or 4 number of channels) inside a vehicle. The rear part is made of 2 half shells molded in aluminum alloy. Possibility to add a multi channel connector at the other cable end. Cable/receptacle tensile strength : 100 daN (depending on cable perfor-mances). CTOS 00C00/CTOL 00C00 Straight Backshell Receptacle for Tactical Cable
L1
L2
L3
L7
L4
SOCAPEX
D2
SERIES L1 L2 L3 L4 L7ØD2 CTOS MM* 23 13.6 132 max 64.7 49.9 33 CTOS SM** 23 13.6 146 max 78.7 49.9 33 CTOL MM* 27 13.6 152 max 84 60 33 CTOL SM** 27 13.6 152 max 84 60 33
PLANCHE CTOS CTOL 3_3
BACKSHELL MAIN USE : To be used inside and outside of a vehicle to connect CTOS receptacle to the electro-optic transceivers, in a non protected or humid area. Straight backshell to be used with a 1,2, 4 fibers tactical cable inside or outside a vehicle. The rear part is made of an aluminum alloy shell with bit of cable retention gland. Complete front and rear sealing. Possibility to add a multi channel connector at the other cable end. Cable/ receptacle tensile strength : 100 daN (depending on cable performance). CTOS 00M00/CTOL 00M00 Sealed Straight Backshell Receptacle for Tactical Cable
L1
L2
L3
L7
D2
L2 L3 L1 L2 L3 L7 ØD2 CTOS MM* 23 13.6 83 49.9 39 CTOS SM** 23 13.6 97 49.9 39 CTOL MM* 27 13.6 102 60 39 CTOL SM** 27 13.6 102 60 39 L7 SERIES
L1
* MM
: Multimode
** SM
: Singlemode
10
Made with FlippingBook - professional solution for displaying marketing and sales documents online