Contact Us
Shop Now
FG CLEANROOM PRESET TOR CLEANROOM PRESET TORQUE SCREWDRIVER QUE SCREWDRIVER
Poka-yoke torque screwdriver prevents over applied and eliminates fastener breakage issues. yoke torque screwdriver prevents over-torque. Cam-over technology ensures correct torque is
Minimize Particle Generation: A high-grade, low paint, reducing potential contamination during assembly.
grade, low-outgassing powder coat finish eliminates flaking
Superior Leak Protection: Dynamic wear-resistant seals create a double barrier against grease leakage, ensuring a clean workstation. resistant seals create a double barrier against grease
Enhanced Cleanliness: The cleanroom screwdriver has aprotective polyurethane sleeve, which adds an extra layer of defense against airborne contamination. Preset screwdriver ensures that the correct torque value is consistently applied to each fastener. Tamper-proof internal adjustment. No external adjustment scale Calibration life 4x ISO standards (for the FG proof internal adjustment. No external adjustment scale—must be preset using a torque analyzer. must be preset using a torque analyzer. for the FG-8i CR, FG-20i CR, FG-40i CR, and FG-125i CR models). 125i CR models).
Designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789: 2017 (+/ setting). igned and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789: 2017 (+/ igned and manufactured to meet orexceed the accuracy and repeatability requirements of ISO 6789: 2017 (+/- 6% of
Torque Ranges
Drive
Torque Ranges American 1.6 – 8 lbf.in 2 – 20 lbf.in 20 lbf.in 4 – 40 lbf.in 40 lbf.in 25 – 125 lbf.in 125 lbf.in 8 lbf.in
Model
Item # 076452 076453 076454 076455
S.I.
Size
Weight 7.3 oz. 7.3 oz. 11.5 oz. 11.5 oz.
Length
FG-8i CR FG-20i CR FG-40i CR FG-125i CR
9 – 90 cN.m
1/4" F/Hex 1/4" F/Hex 1/4" F/Hex 1/4" F/Hex
5.2″ 5.2″ 6.3″ 6.3″
22 – 226 cN.m 0.4 – 4.5 N.m 2.8 – 14.1 N.m
Cleaning Regimen
Preset Tool
Please note that these tools are not designed to be submerged. Cleansing procedures involving isopropyl alcohol-based solvents are permitted. Cleansing procedures involving water and based solvents are permitted.
There is no external adjustment scale be preset using a torque analyzer. For a service fee, Mountz's service department can preset the tool at the required torque value. There is no external adjustment scale—the tool must department can preset the tool at the
Note!
A removable, supplied with FG and FG-125i models. A removable, T-bar is supplied with FG-40i CR 125i CR
1080 North 11th Street, San Jose, CA 95112 | Phone: (408) SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com mountztorque.com
Made with FlippingBook Annual report maker