RNJ LOW PROFILE
<<< PANEL DRILLING & RECOMMENDED TORQUE VALUES
Jam Nut version (RNJ LP 26 and 27)
Square Flange version (RNJ LP 66 and 67)
Rear accessories torque values The following values must be observed. Before applying this coupling torque, locking glue has to be applied on the rear thread of the connector.
Shell size
11
13
15
17
19
21
23
25
Coupling torque (Nm)
11 ± 0.5
11 ± 0.5
14 ± 0.7
14 ± 0.7
17 ± 0.8
17 ± 0.8
20 ± 1
8 ± 0.4
(lb.inch)
0.9 ± 0.05
1.24 ± 0.06
1.24 ± 0.06
1.58 ± 0.08
1.58 ± 0.08
1.92 ± 0.09
1.92 ± 0.09
2.28 ± 0.11
Power contacts with PCB tails
Remark: the design of the RNJLP27 shell is modified when delivered with PCB contacts (shorter design without serrations) Other dimensions available upon request: coax, twinax… For other shell configurations (RNJ LP 67/26/66) equipped with PCB contacts (specific applications), please consult us.
RNJ LP 27 CI mm (in) 7.89 (.311) 8.57 (.337) 12.79 (.504) 13.67 (.538) 7.69 (.303) 8.37 (.330) 12.59 (.496) 13.47 (.530)
RNJ LP 27 LI mm (in) 7.89 (.311) 8.57 (.337) 16.29 (.641) 17.17 (.676) 7.69 (.303) 8.37 (.330) 16.09 (.633) 16.97 (.668)
min max min max min max min max
L1
P
L2
L1
S
L2
Stand-Off for PCB
Example of panel drilling
New: RNJ LP 27 receptacles for PCB applications are available with stand-off with holes for M3 screws for fixation on the board.
Note: All the dimensions are referenced from the guiding pin (E, F). The reference axis E goes through the 2 guiding pins centers.
11
Made with FlippingBook - professional solution for displaying marketing and sales documents online