Amphenol • PCB Connectors
26
SIHD
The monolithic connector for use with thermal clamps
The SIHD connector combines excellent electrical performances with high contact density within a robust housing, which can withstand extreme environmental conditions. In addition, the lateral dis- placement capability allows the use of thermal clamps for heat management, as well as a more relaxed positional tolerance on the backplane. The optional central ground strip provides cross talk protec- tion and permits the routing of differential pairs. Contacts can be repaired and replaced individually.
The ability to include ground strips • Transmission of high-speed signals made easy by reducing self inductance with the inclusion of central ground strips • Cross talk and self impedance levels reduced impedance 70Ω to 120Ω • Capacitance distributed along signal contacts
Compatible with the use of thermal clamps Its standard contact technology, already used in the SIAL connector, permits the lateral displacement (±0.25 [.010]) of the pin into the socket without generating any stress on the contact termination on the PCB. This feature allows the use of thermal clamps to keep the daughter board in position after mating, as well as the dissipation of energy generated by the components on the board from the heat sink (thermal drain) to the cold wall (liquid cooled) or to the chassis. The locking of the thermal clamps provides the lateral movement of the plug into the receptacle. The SIHD allows this lateral displacement of ±0.25 [.010] without creating stress on the solder joints or on the contact area.
QUICK SELECTION GUIDE
Signal contacts
Ground Strip
Keying
Fittings
Housings
250 positions available
For receptacles: style B (guiding)
Without ground strip: 128, 158, 256
FEMALE
Reduced cross talk level Reduced self impedance level Capacitance distributed along signal contacts
For plugs: fixing on thermal drain or on PCB
With ground strip: 102C, 204C, 230C
10 or 6 holes Half of the pins on the plug Half of the pins on the receptacle
MALE
PAGE 30 PAGE 31
PAGE 31
PAGE 32
PAGE 33
PAGE 34
All dimensions are given for information only and are in mm [inch], except as otherwise specified
Made with FlippingBook - Share PDF online