Amphenol • PCB Connectors
29
SIHD >>> TECHNICAL SPECIFICATIONS
Dimensional characteristics
H = 16.9 to 17.95 [.665 to .707] for plug H = 10.22 to 11.15 [.402 to .439] for receptacle A = 11.6 to 15 [.457 to .591] L = 77.86 to 221 [3.065 to 8.701]
H
A
L
A
Plan originel ECHELLE
DESSIN: le
Amphenol Socapex
1,000
TECHNIQUE:
1/1
Female contact
Male contact
A
Plan originel ECHELLE
DESSIN: le
Amphenol Socapex
1,000
TECHNIQUE:
L
BP 29 - 74311 THYEZ CEDEX
A
Plan originel ECHELLE
DESSIN: le
Amphenol Socapex
1,000
TECHNIQUE:
1/1
Cross cavity by Amphenol: lateral displacement compatible • Cross section of the lateral displacement of the male contact inside the female cavity • Maintains 2 points of contact • Allows a ± 0.25 [± .010] lateral displacement • No stress on solder joints or on the contact area
Mating end size: 0.6 x 1.2 [.047 x .024] Contact section (mating side) : 0.72 mm² [.001 in²] Material: phosphorous bronze (stamped) Plating: • Terminations - tin lead or lead free on other contacts (M1YD) • Active contact area - gold over nickel
Material: beryllium copper (stamped)
Plating: • Terminations: tin lead or lead free on other contacts (F1U1, F1U2, F1U3, F1YC, F1YL) • Active contact area: gold over nickel
Materials •
Guiding devices: passivated stainless steel 303 Polarizing pins: passivated stainless steel 303 Plastic insert: thermoset DAP, 40% glass fiber filled
• •
MECHANICAL CHARACTERISTICS Backoff 1 (mm) Mating force per contact (N) Unmating force per contact (N)
1
0.58 MAX
0.16 < F < 0.58
1 : When both connectors are fully mated, the backoff is the maximum distance the connectors can be unmated while functioning properly
Durability cycles
500
Sinusoidal vibrations (10 to 2000 Hz) micro discontinuity 10ns - unloaded PCB - loaded PCB Random vibrations (50 to 2000 Hz) micro discontinuity 10ns
20 g 10 g
0.1 g² / Hz
Shocks 6ms 1/2 sinus micro discontinuity 10ns
100 g
Recommanded tightening torques - nuts for Ø 2 mm screws, brass m.N - nuts for Ø 2.5 mm screws, brass m.N ENVIRONMENTAL CHARACTERISTICS Thermal shocks (°C)
0.2 0.25
-55 / +125
Salt Spray (hours)
96
Humidity Days
56 40 90-95
Derating Curve
Temperature (°C) Humidity rate (%)
0 0.5 1 1.5 2 2.5 3.5 3
ELECTRICAL CHARACTERISTICS Current rating per contacts (A)
3 - See derating curve
Insulation resistance (at 500Vdc) (GΩ)
5 MIN
Contact resistance (mΩ)
12 MAX
Dielectric Withstanding Voltage (Vrms) Capacitance between contacts (pF)
750*
2.5 MAX 25 MAX
Self induction (nH)
0
50
100
150
Immunity against noise of groundings for connectors with central ground strips
Noise ≤ 400mV for 0.1 A intensity per contact and signal rise time of 2ns
Temperature (°C)
* 375Vrms only for F1U2 cts
All dimensions are given for information only and are in mm [inch], except as otherwise specified
Made with FlippingBook - Share PDF online