Amphenol
RNJ - Rack and panel cylindrical connectors
CONNECTOR MOUNTING Generalities • The dimension of 36 +0 -0.5
between the flanges is mandatory to secure the technical performances at the mating position.
• A guiding system has to ensure the correct positioning of the rack independently of the connectors. • No mechanical stress must be applied to the rear of the plug by the wires.
• To mount an accessory on the plug, it is necessary to use a holding support to avoid strain on the internal set of the plug. • A stainless steel pin is delivered with both plug and receptacle connectors. The pin ensures a perfect positionning of the connector on the panel.
Mated connectors
(Dimensions in mm)
PANEL DRILLING AND RECOMMENDED NUT COUPLING TORQUE
Shell size
K min
W Diam. X +0.1/-0 Nut coupling torque Clamping bush for RNJ plug
Plug Receptacle mm (in)
mm (in)
mm (in)
N.m 4.5/5.7
11.69 (0.460) 12.81 (0.504) 13.94 (0.549) 15.06 (1.559) 16.88 (0.665) 18.00 (0.709) 19.12 (0.753) 20.24 (0.797) 20.30 (0.799)
20.88 (0.822) 25.58 (1.007) 28.80 (1.134) 31.98 (0.593) 35.15 (1.384) 38.28 (1.507) 41.50 (1.634) 44.68 (1.759) 48.08 (1.893)
-
11
-
-
32.60 (1.283) 36.00 (1.417)
11
13
6.2/6.8
RNJ 8982 A11
13
15
7.9/8.5 9.0/9.6 (1.259)
RNJ 8982 B13
15
17
39.60
RN J8982 C15
43.30 (1.705) 47.00 (1.850) 50.60 (1.992) 54.20 (2.134) 59.70 (2.350)
17
19
10.2/10.7
RNJ 8982 D17
19
21
11.3/12.4
RNJ 8982 E19
21
23
12.4/13.6
RNJ 8982 F21
23
25
13.6/14.7
RNJ 8982 G23
25
-
15.8/16.9
RNJ 8982 H25
REAR ACCESSORIES COUPLING TORQUE The following values must be respected. Before applying this coupling torque, locking glue has to be put on the rear thread of the connector.
Shell size
11
13
15
17
19
21
23
25
Coupling torque (Nm)
8 ± 0.4
11 ± 0.5
11 ± 0.5
14 ± 0.7
14 ± 0.7
17 ± 0.8
17 ± 0.8
20 ± 1
RNJ - Rack and panel cylindrical connectors
13
Made with FlippingBook - Share PDF online