BlueCool V-PRO chiller systems Application guidelines
For a complete chiller system, please select the following:
Sea water circuit Please order separately the components for the sea water circuit consisting of: Sea water inlet Sea water strainer Sea water pump Closing valve Overboard discharge Water hose Chilled water circuit Please add the required components for the chilled water circuit consisting of: Circulation pump Piping or hosing system with insulation 3-way valve (optional) Expansion tank Turn ball valve T-pieces Cabin accessories necessary for each single cabin Please add for every single cabin the following components and accessories: Air handler Supply air grille Air ducting Transition box Water hoses for condensation drain Cabin control (control panel, display cable, temperature sensor and control box) Return air grille See page 126 See page 152 See page 153 See page 153 See page 159 See page 160 See page 146 See page 160 See page 146 See page 159 See page 159
Core unit Please select the V-PRO units according to the required cooling capacity and the level of redundancy required. Up to 6 units with different cooling capacities can be combined. V-PRO unit The chiller unit as well as the following components are included in the scope of delivery: ■ Integrated chiller electronics incl. MyTouch display See page 115
See page 160 See page 160 See page 159
■ Installation manual ■ Operating manual
Electronic control box for V-PRO unit Please order separately one of the control boxes for the V-PRO units. Minimum requirement is the pump control box. V-PRO Electronic box Each control box includes the pump control functions. Only one box out of three types to be selected. Rack for V-PRO unit Please add one of the racks available for V-PRO. Each rack can be used with any and different cooling capacities. V-PRO Rack If chiller units shall be installed into a rack, choose the required rack system out of 7 options to stack units side by side or on top of each other. Silent blocks are already included in scope of delivery. See page 119 Manifold for V-PRO unit Please add one of the manifolds available for V-PRO. Predesigned manifolds allow the combination of V-PRO units with different cooling capacities. V-PRO Manifold Add preconfigured manifold sets to simplify hydraulic connections. Those are equipped with ball valves for each sea and chilled water connection to ensure easy service of chiller units. See page 118 See page 117
See page 156 See page 159 See page 159
See page 144
See page 152
Accessories for BlueCool V-PRO Please order separately the accessories for the V-PRO Series core unit: V-PRO Silent block kit. Single V-PRO units that are not combined with a rack system can be supplemented with silent blocks.
See page 162
112
113
Made with FlippingBook Digital Proposal Creator