WALLTITE ® CLOSED-CELL SPRAY POLYURETHANE FOAM
SKYTITE ® CLOSED-CELL SPRAY FOAM ROOFING SYSTEM
High-Performance Insulation + Seamless Air Barrier
Engineered for Performance. Designed for Longevity.
IDEAL COMMERCIAL APPLICATIONS • Exterior and Interior Wall Cavities • Precast Concrete Walls • Exterior Foundations & Below-Grade Walls • Slab Edges and Underslab • Roof-to-Wall Transitions • Educational, Healthcare & Government Facilities
IDEAL COMMERCIAL APPLICATIONS • Low-Slope & Flat Roofs • Retrofit Roofing Over BUR, Metal, or Membrane Systems • Complex Architectural Roof Designs • Facilities Requiring High Wind Uplift Resistance • Projects Seeking Lowest Lifecycle Roofing Cost • Versatile for other uses including below grade / under slabs, exterior tanks and more
ADVANTAGES OF SKYTITE
ADVANTAGES OF WALLTITE
Lowest Lifecycle Cost SKYTITE delivers 20–30 years of performance, with renewability through recoating—no tear-off required. Fewer seams mean less maintenance and greater long-term savings. Seamless, Leak-Free Protection Spray-applied and self-flashing, SKYTITE forms a continuous, watertight layer—even around penetrations and complex shapes. Efficient Thermal Control With an R-value of 6.2 per inch and reflective elastomeric top coatings, SKYTITE roofing systems reduce urban island heat gain and provide increased efficiency.
Superior Retrofit Solution Easily applied over existing roofs in most cases, SKYTITE avoids tear-off, reduces waste, and limits disruption— perfect for BUR and single-ply replacements. Sustainable by Design HFO-based with ultra-low GWP and zero ozone depletion, SKYTITE supports lower emissions and regulatory compliance, along with being GREENGUARD Gold certified, and backed by an Environmental Product Declaration.
All-in-One Building Envelope Solution WALLTITE provides high R-value insulation (7.0-7.5 per inch) while serving as an air, vapor, and weather barrier, all in a single application, simplifying installation and enhancing performance. Seamless, Spray-Applied Protection Its fully adhered, monolithic application seals gaps and penetrations, eliminating thermal bridges and ensuring continuous protection. Proven Structural and Moisture Benefits WALLTITE reinforces wall strength, blocks air and water intrusion, resists mold, and is FEMA-recognized for flood resistance.
Superior Long-Term Performance With ultra-low vapor permeability and air leakage, WALLTITE delivers durability and consistent thermal performance over time. Sustainability & Compliance Low-GWP HFO chemistry, GREENGUARD Gold low- emission certification, UL Solutions bio-content and mold resistance verified, Environmental Product Declarations to support LEED contribution, and evaluated for air and weather barrier system (AWB) performance.
Density (pcf-nominal)
R-Value (per inch)
Compressive Strength
Product
Description
Density (pcf-nominal)
R-Value (per inch)
Max Single Pass
Product
Description
Back to Back Pass
Lower density, high-yield formulation with ASTM Type III compliance for installation efficiency on tanks, digesters, under commercial slabs, and on low foot-traffic exterior roofing projects. Standard roof foam system with ASTM Type III compliance for low-slope roofing. Wide offering of approvals, with optimized coverage and surface texture. Higher density roof foam system with ASTM Type III compliance. More robust, offering higher compressive values for commercial and industrial applications with increased yield and smooth surface texture.
SKYTITE C3-2.5
2.5 - 2.7
R-6.2
40 psi +/-5
High-yield, lower density formulation for optimized total installed cost, based up on the highest R-value, coverage and installation efficiency. High-performance, medium-density formulation designed for smooth,effortless application while meeting GREEN - GUARD Gold standards and other rigorous requirements. Ideal for insulation and air barrier projects, for ASTM Type II compliance.
R-7.4 at < 3.5” total R-7.1 at ≥3.5”
3.5” + 3.5” with no dwell time (over 3.5” allow 10 mins per inch)
WALLTITE Max
1.8 - 2.0
4”
SKYTITE C3-2.8
2.7 - 2.9
R-6.2
45 psi +/-5
R-7.5 at <3.5” total R-7.2 at ≥3.5”
3.5” + 3.5” with no dwell time (over 3.5” allow 10 mins per inch)
WALLTITE One
2.0 - 2.3
3.5”
SKYTITE C3-3.0
2.9 - 3.1
R-6.2
50 psi +/-5
Made with FlippingBook Learn more on our blog