QUICK REFERENCE GUIDE
CORROSION RESISTANT, CERAMIC COATED SCREWS • Grip-Deck ® SDS self-drilling bulk or collated screws • Grip-Deck ® HiLo wood thread bulk or collated screws • 1 5/8” thru 6” lengths in 1,000 ct. cartons • Grip-Lok ® Autofeed Fastening System available • ASTMB117 salt spray test 1000+ hours
BUILDING WRAP FASTENERS • 2” dia. Thermal-Grip ® flat washer • Solid cap design (no keyholes) •
Carbon black additive for enhanced UV resistance Approved to attach all major brands of wrap including DuPont ™ Tyvek ® CommercialWrap ®
•
SIP SCREWS (Structural Insulated Panel) • SIP LD Screw (24 gauge to 18 gauge) • SIP HD Screw (16 gauge to 12 gauge) • SIP TP Screw (wood and CMU) • Insulated nail base and SIP panel attachment • Available lengths 2”- 18”
LATH / STUCCO FASTENERS • Grip-Plate ® Lath & Plaster Washer • Keyholes for plaster/basecoat bonding • Attach Lath per ASTM C-1063 • Available with tabs or flat • For use with Grip-Deck ® screws
CONTINUOUS INSULATION (ci) FASTENERS, Commercial • Thermal-Grip ® ci prong washer + Grip-Deck ® Screws • Pre-spotting prongs for on-the-wall screw assembly • 2” dia. solid cap design for air-barrier performance • ASTM E2357 Air Barier and ASTM E331 Water Holdout test • Approximately 24-32 fasteners per 4’ x 8’ of insulation (Consult insulation manufacturer details) CONTINUOUS INSULATION (ci) FASTENERS, Residential • Plasti-Grip ® ci prong washer + Grip-Deck ® Screws • Pre-spotting prongs for on-the-wall fastener assembly • 1 ¾” dia. plastic tapered plate • Compatible with screws and nails • Shoot it, screw it, or nail it
GYPSUM SHEATHING • Grip-Plate ® Gypsum Washer • 1 ¼” dia. galvanized steel •
Large dia. washer spans board joints Increased wind blowoff resistance
•
TILT WALL / MASONRY / BLOCK • Plasti-Grip ® PMF (Plastic Masonry Fastener) reduces thermal bridging • Simple to install : Pre-drill w/ 5/16” masonry bit, then hammer flush • Available for insulation thicknesses 1”- 5” • 2 ¼” dia. plastic head • No pins, screws, or adhesives required
GRIP-LOK ® MW PLATE • Secures 1.5”- 5” mineral wool • Shoot it, screw it, or nail it •
VICTORY BEAR TRACK SYSTEM • Flex-Tite and Quick Clip Systems •
Clean aesthetic look for exposed interior insulation Commonly used for interior tilt / masonry walls Available for common insulation thicknesses
All substrates including wood, metal, and masonry Provides permanent attachment unlike adhesive stick pins Available with optional Grip-Deck ® panhead gasketed screws
• •
• •
THERMAL-GRIP ® INSULATION FASTENING SYSTEM • FAST! No pre-drilling necessary, just point and shoot • Rapidly attaches rigid insulation to concrete, masonry, and tilt up/ precast walls • Fastener lengths available from 1” to 6” thickness • Quick charge lithium-ion battery with 165mm fuel cell
GRIP-DECK TUBESEAL ™ FASTENERS •
Attaches all types of insulation over a primary air barrier / WRB
• •
TubeSeal seals out air and water Available lengths for insulation 1”- 4”
• Available pre-assembled for steel or wood studs with various washers
MASONRY CAVITY WALL ANCHORS •
LABOR SAVING TOOLS •
Thermal-Grip ® Masonry Veneer Anchor for all substrates Polycarbonate design reduces thermal-bridging
Grip-Lok ® Autofeed Fastening System Rapid attachment for significant labor-savings Adapters available for various washers listed Available either corded or cordless Up to 3” collated screws for steel or wood studs
• • • •
• • • •
Wedge-Seal seals out air and water Wire tie design allows for easy assembly Available for 1”- 4” thick assemblies
wallssales@trufast.com www.trufastwalls.com (616) 454-3100
TESTED. SPECIFIED. APPROVED. Call for technical support and fastener spacing specifications. Patented or Patent Pending.
Made with FlippingBook Learn more on our blog