MaxForce Generators
Residential Waterproofing
We have installed thousands of generators into trailer and truck mounted spray rigs. The MaxForce line of generators are built from the ground up to work in demanding environments. Unique features such as integrated air compressors, poly undermount fuel tanks, remote fuel fill necks, high cooling radiators, and remote displays make it the perfect solution for your trailer or truck.
Ideal sprayer for contractors applying asphalt based waterproof coatings on residential foundations. Realize the flexibility of a self-contained heated spray system. The MaxForce 4030 does not require permanent installation as the heat is provided by a liquid-cooled engine. Typically hooked up to poly totes or heated tanks where you can gravity feed the material out of the container and into the pump. MaxForce 4030 Part No: SB515107 4,000 psi, 4.0 gpm
Combo
MaxForce Commander
MaxForce Commander Flatbed
40 kW
Powerful Integration • Designed to be narrow for more efficient truck/trailer layouts • Integrated main on/off disconnect
Turn-key waterproofing spray system designed for flatbed truck installation. The Commander ties into the coolant system of the vehicle to heat material. Part No: T90096-00 3,300 psi, 3.0 gpm, 230 gal tank
Turn-key waterproofing spray system designed for pickup truck installation. The Commander ties into the coolant system of the vehicle to heat material. Part No: T90095-00 3,300 psi, 2.2 gpm, 113 gal tank
• Direct connection to Reactor 3
• Customizable placement of fuel fill and control panel locations • Optional integrated compressor provides cleaner power to proportioner compared to separate electric powered compressors • Doosan engines • Sincro alternators • Available in three models: 30-40 Combo (30kW & 40cfm), 40-40 Combo (40kW & 40cfm), and 40kW
Commercial Waterproofing, Air Barrier, Roof Coatings The MaxForce AC Series are high production, gas-hydraulic sprayers designed to dispense directly from 55-gallon drums. The 20HP engine powers the Graco hydraulic pump and an air compressor to operate a 55-gallon supply pump.
MaxForce e-Agitators The MaxForce e-Agitator provides the same performance as pneumatic agitators but with the efficiency of an electric motor, making it the ideal choice for spray foam and polyurea contractors. The e-Agitator requires 110/120V, 4A, weighs only 16.5 lbs and plugs directly into your extension cord.
MaxForce GH7225AC
MaxForce GH4040AC Ideal for most waterproofing, air barriers and acrylic roof coatings
Part No: T10449-72 7,250 psi, 2.5 gpm Ideal for silicones, urethanes, STPE, STPU coatings
Part No: T10449-73 4,000 psi, 4.0 gpm
www.maxforce.com info@maxforce.com 1-888-4MaxForce
Built for the Way You Work
Made with FlippingBook Learn more on our blog