1. Print your design in mirror image on Sublimation Paper (TP Muggit HD paper).
2. Place about 10 sheets of normal copy paper underneath your Teflon sheet on top of the rubber of your press. Place the Teflon sheet on top of the copy paper.
3. To set the pressure, use very low to no pressure, just close the press on top of the Sublimer. PLEASE NOTE: It’s very important to s et the pressure first before you switch on the press.
4. For the 3mm Sublimer, set the temperature of the press to 180°C and 180 seconds. For the 6mm Sublimer, set the temperature of the press to 180°C and 360 seconds.
5. Remove the clear plastic protective layer at the front and back of the Sublimer. Wipe off all dust or unwanted particles from the Sublimer with a lint-free cloth before you apply the print.
Made with FlippingBook - professional solution for displaying marketing and sales documents online