Sublimer 3mm and 6mm

Bending the bottom of the Sublimer into a footstand:

1. To make a sublimer piece with a footstand, you will follow steps 1-10 first.

Making a table stand:

2. When the sublimer is cooled down completely after you have pressed it, place only the bottom foot part back into the heat press with a piece of paper on top. Make sure it is straight because only the bottom part that has contact with the hot press element will go soft and that will then bend into a stand.

3. Press for the same amount of time you used to transfer the print.

Made with FlippingBook - professional solution for displaying marketing and sales documents online