Sapling Original Equipment Whether you prefer analog or digital, these clocks have what you need to make a fully functional clock system.
1
Model No.
Description
Each
SAM Series Smart Clocks SAM-1BS-12R-1-J24 SAM-1BS-12R-4-J24 SAM-1BS-16R-1-J24 SAM-1BS-16R-4-J24
Digital Clocks
12", 120VAC $295.95 16", 120VAC $396.95 12", 24VAC 16", 24VAC $295.95 $396.95
Analog Clocks
Model No.
Description
Each
3100 Series Surface Clocks SBD-31S-254-4R-J24 SBD-31S-404-4R-J24 3100 Series Flush Clocks SBD-31F-254-4R-J24 SBD-31F-404-4R-J24 3200 Series Surface Clocks SBD-32S-254-1R-J24 SBD-32S-404-1R-J24 3200 Series Flush Clocks SBD-32F-254-1R-J24 SBD-32F-404-1R-J24 3300 Series Surface Clocks SBD-33S-254-1R-J24 SBD-33S-404-1R-J24 3300 Series Flush Clocks SBD-33F-254-1R-J24 SBD-33F-404-1R-J24 Double Dial Bracket SAB-1BD-00S-0-J24
2.5", 4-digit, 24VAC 4", 4-digit, 24VAC 2.5", 4-digit, 24VAC 4", 4-digit, 24VAC 2.5", 4-digit, 120VAC 4", 4-digit, 120VAC 2.5", 4-digit, 120VAC 4", 4-digit, 120VAC 2.5", 4-digit, 120VAC 4", 4-digit, 120VAC 2.5", 4-digit, 120VAC 4", 4-digit, 120VAC
$324.95 $448.95 $333.95 $437.95 $459.95 $548.95 $402.95 $487.95 $661.95 $754.95 $673.95 $697.95 $122.95
SAM Series • The clocks automatically recognize these protocols:
3-wire digital communication 2-wire digital communication
Sync-wired 59th minute correction Sync-wired 58th minute correction Sync-wired National Time and Rauland • Fully automatic plug and play; no setting required • Automatic frequency detection • Quick correction for time change (maximum 5 min.) • UL, cUL Listed; FCC Approved
Model No.
Description
Each
SRM RS485 Series Clocks SRM-1BS-12R-1-J24 SRM-1BS-12R-4-J24 SRM-1BS-16R-1-J24 SRM-1BS-16R-4-J24
12", 120VAC $346.95 16", 120VAC $438.95 12", 24VAC 16", 24VAC $314.95 $408.95
DD* bracket
Common Features • Immediate correction for time change, when used with RS485 or 2-wire digital communication input • 6 digit display also available • 12 or 24 hour display
SRM Series • Uses local power plus two wires for communication • Unlimited clocks can be run on the same communication line when daisy chained • Data LEDs for verification of transmission and receipt of data • Analog and digital clocks can be run
Double Dial Bracket
• Interfaces with Sapling’s Elapsed Timer for chronograph timer functionality (3200/3300) • “Bell”, “Fire” and addressable messaging capabilities • Automatic daylight saving time (when used as a primary clock)
on the same communication line • UL, cUL Listed, FCC Approved
• Up to four levels of programmable brightness (depending on model) • Alternating time/date display • Ten year battery backup • UL, cUL, FCC pending • Made in the U.S.A.
Model No.
Description
Each
Double Dial Brackets (for SAM & SRM Series) SAB-1BD-12R-0M-J24 12" bracket
$222.95 $246.95
SAB-1BD-16R-0M-J24
16" bracket
Additional 3200 Features • Elapsed Timer capabilities • RS485 input Additional 3300 Features • Can interface with existing systems • Elapsed Timer capabilities • 58 minute, 59 minute, National Time and Rauland sync wire inputs, Midnight Reset input, RS485 input and output and two wire digital communication input • Interfaces to most Rauland and Dukane Master Clock/Intercom systems
*Note for Double-Dial Clocks: For analog clocks, purchase two clocks and one bracket to create the double dial clock. For digital clocks, purchase two surface clocks of either size and one bracket to create the double dial clock.
Double Dial Bracket
All products listed on this page are non-cancellable and non-returnable.
▪ 36
ORDER DESK OPEN 7:30A TO 5:00P CST MONDAY - FRIDAY
Made with FlippingBook Online newsletter