Vehicle Driving
After the vehicle stops under ACC control, the following situations (not limited to) will cause Electronic Parking Brake (EPB) to automatically start and ACC to exit:
• Parking for more than 3 minutes;
• The driver's door is open;
• Unfasten the driver's seat belt;
• Turn off the ESP function;
• Exit D position.
ACC takeover reminder
ACC can apply a maximum braking force of approximately 40% of the vehicle's braking capacity. If ACC braking is not enough to maintain a suitable distance from the vehicle in front, the central control display screen will continuously issue a "Please take over immediately" alarm. At this time, please take over vehicle control immediately and take collision avoidance measures to avoid danger.
IACC troubleshooting
When the ACC system detects that the radar is blocked, the radar is faulty, or a related system fails, the cruise status indicator on the central control display will turn orange and there will be a corresponding prompt:
• The radar is blocked;
- If the central control display prompts "Forward millimeter - wave radar is blocked", please clean the radar surface. - If the fault still cannot be eliminated automatically for a long time after cleaning, please go to a Changan Automobile authorized dealer for handling. • Limited function. If the following faults occur and the fault reminder cannot be automatically eliminated for a long time, and the fault still exists after restarting the vehicle, please go to a Changan Automobile authorized dealer for inspection and repair:
125
Made with FlippingBook - Online catalogs