Vehicle Driving
contrast lighting (such as entering and exiting tunnels) will affect system functionality.
The system may not operate or may trigger erroneous corrections under the following conditions or road sections:
•
Temporary construction marks for roads, etc.
• The lane lines are covered by dust/snow, etc.
•
The sensor is covered
• Sharp turns or narrow roads
•
Towing vehicles behind this vehicle
It is strictly forbidden to repair the windshield near the sensor (Interior rearview mirror position). Cracks on the windshield will affect the recognition effect of the camera. The entire front windshield must be replaced. Slight movement of the radar sensor may cause the system unable to work properly. If the sensor and its surrounding area are impacted, please go to a Changan Automobile authorized dealer for inspection.
Instructions
When the vehicle is powered on, click [Settings] - [Intelligent Driving] - [Lane Assist] on the central control screen to turn on or off the "Emergency Lane Keeping" function.
After the ELKS function is turned on, when the vehicle speed is greater than the system operating speed (ELKS_LCS: 40km/h, ELKS_re: 60km/h), the system enters standby mode. If the sensor recognizes lane lines on both sides and the vehicle deviates from the lane and there is a risk of collision with the "oncoming vehicle" or "rear vehicle", or if the vehicle is in danger of colliding with the road boundary guardrail, the system will intervene briefly to correct the vehicle's driving trajectory.
158
Made with FlippingBook - Online catalogs