Travel Preparation
2. As shown in the left figure below, use a hard, thin metal sheet (or rod) to reach into the position indicated by the arrow in the left figure below and pry open the upper and lower shells.
3. Remove the circuit board and take out the battery for replacement.
4. After replacing the battery, install the circuit board, buckle the upper and lower shells, put on the decorative ring and buckle the back cover.
CAUTION
• Do not touch the circuit board, as this may generate static electricity and damage the circuit board. • The positive and negative terminals of the battery must be installed according to the correct markings, otherwise the circuit board will be damaged. • The new battery shall be of same specification with the original battery (3 V, CR2032) of the remote control. • Improper operation when replacing the battery may damage the circuit board. It is recommended to contact a Changan Automobile authorized dealer for replacement. • If the smart remote control key is placed together with mobile phone, laptops, tablet computers and other objects containing batteries or metal, there may be a risk of induction unlocking failure. • The battery operating environment is - 20°C~85°C, the key will become ineffective outside the temperature range.
10
Made with FlippingBook - Online catalogs