Travel Preparation
CAUTION
When back door is electrically opened or closed, avoid pushing or pulling back door manually.
Electric back door initialization
After the battery is reconnected, if the back door is open, operate the back door to open or close. The back door will automatically close and lock, completing the position initialization. After replacing the back door ECU controller, it is necessary to perform back door opening degree initialization learning. Please contact a Changan Automobile authorized dealer for initialization.
Height setting
The back door has the opening height memory function, which is used to set the opening height of the back door. • Hover back door at the desired height, and press and hold the button on the inside of back door for more than 3 seconds. When you hear a beep, back door opening height is set successfully.
• On the central control screen, click [Settings] - [Vehicle Settings] - [Maximum Opening Degree], and the back door opening height is set successfully.
Anti - pinch Function
For your safety, the back door is equipped with the anti - pinch function.
During the opening or closing process of the back door, when a large resistance is encountered, the anti - pinch function will be turned on. When anti - pinch function is activated, back door will move in the opposite direction for a certain distance and then stop. If anti - pinch is triggered three times in a short period of time, the vehicle will enter the anti - pinch protection mode and will no longer respond to operations. You need to manually close back door until it is locked and wait for about 10 seconds to exit this mode and the function will return to normal. Anti - pinch function is only an auxiliary function. When using back door, you must pay attention at all times to avoid pinching people or hitting obstacles during automatic opening and closing.
26
Made with FlippingBook - Online catalogs