PRODUCT CATALOGUE 2023 | alre.de

ACCESSORIES

ACCESSORIES FOR HEATING TECHNOLOGY / AIR CONDITIONING TECHNOLOGY / PLANT ENGINEERING AND SENSOR TECHNOLOGY

TYPE ATRS-1 ET-01 ET-02 FS-HI FS2-HI JZ-04

ITEM NO. C1809518 MA990000 MA990001 H530975 H531011 E6160133 C1809536 C1809474 C1809462 H5309229 E6160145 E6150031 E6140170 H5309237 ZA990001 MN990001 MN990002 MN990003

DESCRIPTION

EURO / PG

Temperature determination set for ATR 83.0…

2.70 / II 3.20 / I 3.20 / I 16.70 / II 71.90 / II 13.80 / II 13.00 / II 13.90 / II 3.00 / II 10.40 / II 6.10 / II 20.90 / II 20.90 / II 5.50 / II 5.30 / II 7.40 / II 7.40 / II 39.90 / I

Adjusting knob for B1000 series devices, scale: degrees Celsius, pure white glossy Adjusting knob for B1000 series devices, multi-digit display 1 to 6, pure white glossy

Sensor protection (protective wire braiding) for duct hygrostat HI

PTFE filter fine protection for duct hygrostat HI

Capillary tube leadthrough for air ducts with 30-cm protective hose (JTF frost protection thermostats, JMT capillary controllers, WR, JET)

JZ-05 / 6 K JZ-05 / 6 M JZ-05 / 1 M

1 set of mounting brackets (6 pieces) for frost protection thermostat JTF, made of plastic (max. 145 °C) 1 set of mounting brackets (6 pieces) for frost protection thermostat JTF, made of metal

Single mounting bracket for frost protection thermostat JTF, made of metal

JZ-06 / 1

Connection set with duct connections made of plastic, 2 x 90° angles, 2 extensions 90 mm, 4 self-tapping screws, 2-m tube Ø6 mm outside for JDW differential pressure switch, JDL, DF pressure transducer

JZ-07 JZ-08 JZ-09 JZ-10 JZ-13 JZ-17 JZ-18 JZ-19

Mounting bracket for frost protection thermostats JTF

Spare vane for wind indication relay JSL

Spare paddles (4 pieces), from 1" to 8" for flow monitor JSF

Mounting bracket for JDL 109 / -113 and JDW-3 / -5 / -10 with 6 screws Standard rail with drilled holes for fastening control cabinet controllers (length 40 mm)

Adapter plate for Berlin 3000 housing (hard-wired)

Adapter snap-on plate (controller is detachable) for Berlin 3000 housing (wireless) Fully prewired plug-in socket (as for RTBSB-001.411), can be fitted with room thermostats RTBSB-001.086 or RTBSB-001.096

JZ-20-1

E6130144 MN990006

Wall holder including fastening material for duct hygrostat (HI)

21.80 / II

JZ-21

Adapter frame for mounting devices of the Berlin 1000 series in flush-mounted sockets up to 80x80 mm Magnetic fastening set for simple and safe fastening of multi-channel receivers or wiring strips VOORL External antenna for reception enhancement under difficult reception conditions of the multi-channel receiver, antenna cable (JZ-26) is not a part of the delivery scope (see Page 24 for product photo) Antenna cable 1 m for connecting the external antenna JZ-25 with multi-channel receivers

5.00 / I

JZ-24

BN990002

23.30 / II

JZ-25

BN990003

66.10 / II

JZ-26 JZ-27 JZ-28 JZ-29 JZ-30 JZ-31 JZ-32 JZ-33

BN990004 G9990450 H531012 KA999901 KA999902 KA999903 BN990005 KA999904 VV000025

39.70 / II 77.50 / II 45.40 / II 3.90 / II 6.30 / II 4.90 / II 17.50 / II 16.70 / II

LC-display 3½ digit, for MDEKD

IP65 cover set, consisting of a cover with pressure compensation element, O-ring and 3 screws, suitable for retrofitting of the types JDL-111, JDL-112, JDL-114, JDL-115 and JDL-116

Mounting set RTKSA for THK / NTHK / SWK single thermostat Mounting set RTKSA for THK / NTHK / SWK double thermostat Mounting set RTKSA for pipe mounting as contact thermostat Magnetic fastening set for simple and safe fastening

RTKSA seal set, protection rating: IP54

JZ-090.900

alre frame ‘Berlin’ for all flush-mounted controllers with 50x50 cover, pure white, glossy, similar to RAL 9010 Fastening of the VOOPL terminal strip on a metallic substrate (for example, heating manifold) alre frame ‘Berlin’ for all flush-mounted controllers with 50x50 cover, pearl white, glossy, similar to RAL 1013 alre frame ‘Berlin’ for all flush-mounted controllers with 55x55 cover, pure white, glossy, similar to RAL 9010 Fastening of the VOOPL terminal strip on a metallic substrate (for example, heating manifold) Ball impact guard, sun and rain protection; 150x90x47 mm; stainless steel V4A 1.4571

4.20 / I

JZ-090.910

VV000010

4.20 / I

JZ-090.100

S protection 01

G9990170 G9990180

36.20 / III

WP-01

heat conduction paste 2 ml

6.60 / II

ILLUSTRATIONS

S protection 01

alre frame ‘Berlin’

252

Catalogue 2023

Made with FlippingBook Annual report maker