Vehicle Driving
Under suitable conditions, HMA assists in switching high beam status. In the following working conditions or road sections, this function cannot switch high beam state, please control it manually:
• When driving in heavy rain, dense fog, snow or mud;
• When there are pedestrians or bicycles on or beside the road;
• When making sharp turns.
The system may not turn off the high beams if the lights of oncoming vehicles are blocked (e.g. the isolation area).
On the central control screen, click [Settings] - [Lights] - [Front Automatic Beam] to turn this function on or off.
After the function is turned on, when the white icon is displayed on the top of the center display, set the light switch on the center display to "AUTO" and the function enters standby mode. When the function is in standby mode, and when driving at night with a vehicle speed above 30km/h, the function is automatically activated and a green icon is displayed on the top of the central control display. This function automatically turns off high beam when the camera detects a vehicle or street light in front or the ambient illumination becomes brighter. When the camera detects that the vehicle ahead has disappeared for about 3 seconds, high beam will be turned back on. When the light switch on the central control display is set to other than "AUTO", the function enters standby mode and no longer automatically turns high beam on and off.
Interior Lights
Front Reading Lamp
100
Made with FlippingBook - professional solution for displaying marketing and sales documents online