Vehicle Driving
• Unfasten the driver's seat belt;
• HDC/ESP/ABS/ Autonomous Emergency Braking (AEB) activated;
• The driver actively speeds up more than 15 min or the speed exceeds 155km/h;
• Associated system failure.
If the ACC controls the vehicle to stop, the ACC will not exit when the brake pedal is depressed.
CAUTION
In any case, if you determine that the vehicle is at risk of safety, please cancel or close the ACC decisively and take over immediately and control the vehicle.
Restore ACC
When ACC is switched from active to standby:
Press the button
and ACC will reactivate and resume the previously set speed.
Press the button
and ACC will reactivate and automatically set the current vehicle
speed to the cruising speed.
CAUTION
When the button is pressed to restore ACC, the restored set cruising speed may be significantly different from the current driving speed. The driver must ensure that the set cruising speed meets the speed limit regulations of the current road section, pay attention to the acceleration and deceleration changes of the vehicle, and adjust the cruising speed in time.
Driver active acceleration mode ACC
After ACC is activated, when you actively step on the accelerator pedal to accelerate, the system is in the driver's active acceleration mode (overtaking mode). After releasing the accelerator pedal, ACC resumes control of the vehicle.
118
Made with FlippingBook - professional solution for displaying marketing and sales documents online