Vehicle Driving
- When IACC exits temporarily, only steering assistance exits, and the system will continue to assist the driver in accelerating and decelerating the vehicle. Once the conditions for temporary exit are resolved, the steering assistance can automatically restore. - After the temporary exit exceeds the time limit, the system will completely exit. The column shifter needs to be pulled down again to activate IACC.
Re - engage IACC
When IACC exits temporarily, press the
button, and IACC will reactivate and resume
the previously set cruise speed.
CAUTION
The driver should always pay attention to the system status, promptly notice that the IACC has exited, and take over the control of the vehicle before the IACC is reactivated.
IACC takeover reminder
In the lane line mode, when the IACC cannot assist in controlling the vehicle to drive in the middle of the lane due to excessive vehicle speed, slippery road surface, unclear lane lines, tight corners, uneven road surfaces, etc., the IACC will issue a takeover request when the vehicle is about to deviate from the lane. In this case, take over control of the vehicle immediately.
Driver Behavior Monitoring
IACC is an assisted driving system. When using IACC, both hands can’t leave the steering wheel. If the driver's condition does not meet the safe driving conditions, the central control display screen will successively send out alarm messages containing images, sounds and text prompts. If the driver fails to take over the vehicle in time according to the alarm reminder on the central control display after the alarm, the vehicle will turn on the hazard warning flasher
132
Made with FlippingBook - professional solution for displaying marketing and sales documents online