Performance characteristics:
Maintenance of the shape modeled by the user Stable fixation of the cap to the cannula
Guaranteed passage of saliva even in conditions of bent cannula No leakage of the wire from the cannula in all conditions of use.
Use of the product:
The device must be checked before each use in order to detect anomalies and/or damage during transport and/or storage: 1. do not use if the package is not intact 2. take the cannula and check: • general functionality of the device • adequate degree of cleanliness of the device • absence of cuts, holes, lacerations or abrasions • integrity in general 3. make sure, exerting a slight traction, that the tipis firmly anchored to the cannula SIf the above conditions are met, the device can be considered ready for use; otherwise it is necessary to remove the device from service immediately and contact the manufacturer. Usage: 1. Press the cannula to the terminal of the suction circuit of the pneumatic or hydraulic saliva
suction system and check that it is correctly connected 2. Shape the cannula to fit the patient’s oral cavity.
Prduct storage:
The device must be stored in a dry, well-ventilated place, protected from light and sun. It must not come into contact with heat sources and flammable agents and/or substances, chemical agents, which could alter its safety characteristics. Protect from frost and humidity.
• Temperature of use: from 5 to +40 ° C • Storage temperature: from 5 to +40 ° C • Relative humidity: 0 to 100% • Store the material raised off the ground.
When opening the carton: • Remove the packaging and arrange the material in a visible way. • Check that all the parts included in the accompanying document are present. Once the carton has been opened, the individual bags must be stored away from light and heat sources. After opening, the package must be closed in order to avoid any contamination of the product. The device is supplied NON-STERILE and is single use, reuse is prohibited. Damage to the device caused during transport and handling is not covered by the warranty. Repairs or replacements of damaged parts are the responsibility of the customer.
Disposal of the product:
At the end of use, the cannula has to be removed and disposed of in accordance with the provisions in force in the user’s country.
Pay attention to the handling and disposal of the medical device, using adequate personal protective equipment to avoid possible infections or microbial risks.
Risk of reuse:
Severe / permanent injury or severe worsening of the patient’s condition.
Contraindications:
Due to the particularity of these devices, there are no known contraindications and side effects.
Made with FlippingBook Annual report